Digtal scales from Sartorius, Mettler, Ohaus, AND Weighing, Myweigh & more

digital scale lab balances

Scaleman.com is your source for
balances & scales at discount prices
Since 1995!

Skip to Main Content »

EJ-03C RS-232C serial interface with cable (9 pin to 9 pin 6 ft.)
This interface allows the EJ series to be connected with a multifunction printer or a personal computer.
- EJ-03C cannot be used together with EJ-02C.
- Set the parameters of the data format (bps and btpr) and data output mode (prt), as necessary.
- Use a D-sub 9 pin cable (straight type) to connect with a computer.
- The RS-232C interface has the following four modes.
Stream mode            Outputs data continuously.
Key mode                  Outputs data by pressing the PRINT key.
Auto-print mode       Outputs data which meets the conditions of auto-print.
Command mode     Controls the balance using commands from a computer.


Installation is simple
  1.   Turn off the balance and disconnect the AC adapter if used.   2.   Remove the cover of the option slot on the rear by pressing and lowering it down.   3.   Connect the connector in the slot to the EJ-03C unit and insert it into the slot   4.   Secure the EJ-03C with the screws supplied with the EJ-03C. Fits the following models: [a href="http://balance.balances.com/scales/1100"]EJ120[/a] [a href="http://balance.balances.com/scales/274"]EJ200[/a] [a href="http://balance.balances.com/scales/978"]EJ300[/a] [a href="http://balance.balances.com/scales/448"]EJ410[/a] [a href="http://balance.balances.com/scales/1356"]EJ610[/a] [a href="http://balance.balances.com/scales/1358"]EJ1500[/a] [a href="http://balance.balances.com/scales/270"]EJ2000[/a] [a href="http://balance.balances.com/scales/711"]EJ3000[/a] [a href="http://balance.balances.com/scales/4"]EJ4100[/a] [a href="http://balance.balances.com/scales/486"]EJ6100[/a]
Move your mouse over image or click to enlarge

EJ-03C RS232 Interface with a 6 foot cable

AND
See other products by AND

Availability: In Stock

MSRP: $82.00

YOU PAY: $75.00

You save $7.00
Add Items to Cart
OR

Quick Overview

EJ-03C RS-232C serial interface with 9 pin to 9 pin 6 foot cable. This interface allows the EJ digital scale to be connected with the AD8121B printer or a personal computer.

Product Description

EJ-03C RS-232C serial interface with cable (9 pin to 9 pin 6 ft.)
This interface allows the EJ series to be connected with a multifunction printer or a personal computer.
- EJ-03C cannot be used together with EJ-02C.
- Set the parameters of the data format (bps and btpr) and data output mode (prt), as necessary.
- Use a D-sub 9 pin cable (straight type) to connect with a computer.
- The RS-232C interface has the following four modes.
Stream mode            Outputs data continuously.
Key mode                  Outputs data by pressing the PRINT key.
Auto-print mode       Outputs data which meets the conditions of auto-print.
Command mode     Controls the balance using commands from a computer.


Installation is simple

  1.   Turn off the balance and disconnect the AC adapter if used.
  2.   Remove the cover of the option slot on the rear by pressing and lowering it down.
  3.   Connect the connector in the slot to the EJ-03C unit and insert it into the slot
  4.   Secure the EJ-03C with the screws supplied with the EJ-03C.

Fits the following models:

EJ120
EJ200
EJ300
EJ410
EJ610
EJ1500
EJ2000
EJ3000
EJ4100
EJ6100

 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Hot Buys!

Community Poll

What is your favorite balance ?
 
 
 
 
 
 
 
 
  Loading...
Featured Laboratory Balances:
600 g x 0.01 g $259.77
60 g x 0.1 mg $999.51