Sartorius MSA2.7S0TRDF micro balance is specially modified for filter weighing. Filter weighing balance designed with the special DF stainless-steel filter draft shield is optimized for ultra precise weighing of filters. Different weighing pan diameters are available for different filter sizes. The filter balance can weigh filters up to 50 mm in diameter or you can purchase the optional accessories for filter 75 mm and 90 mm.
Sartorius MSA display offers top-of-the-line technology and information design. Touch screen featuring high-resolution color TFT for high-contrast display of texts and graphics. Outstanding operating convenience and display quality, especially for complex applications that require substantial text input.
MSA2.7S-000-DF filter balance allows users to measure particle emissions in diesel fuel in accordance with 40 CFR 86.1312-2007. The filter balance features an optimized low profile stainless steel draft shield which minimizes the effects of static electricity during filter weighing. It comes standard equipped to weigh filters of up to 50mm diameter, with an optional 75 and 90mm pan sizes also available.
MSA2.7S-0TR-DF filter balance offers a full resolution from 0.1ug to 2.1g, meaning no further adaptations are required to allow the balance to be used for this highly specialized weighing application.
MSA2.7S0TRDF filter weighing balance is now being used by several of the world's leading automotive manufacturers, where it has been adapted for use with the customer's own software programs for data evaluation and storage. Emissions testing is important not only in the automobile industry but also in the petrochemical and oil industries, and the Sartorius filter-weighing balance is just as well suited to these applications. Moreover it can also be used in research and testing institutions in the field of environmental technology, or indeed anywhere that the emissions produced by combustion processes are closely scrutinized.
Additional application maybe for EPA Federal Reference Method(FRM) for measuring PM 2.5 are in the Federal Register (40 CFR part 50, Appendix L, section 8).
Section 1065.290 sums up and describes the requirements in table 1 specifying accuracy, repeatability, and noise. These are "recommendations" not requirements, but customers like to meet them. To meet a repeatability of 0.5 micro-grams, you'll need a microbalance that reads out with 0.1 micro gram range.
Also linearity is a requirement, and listed in §1065.307.
Stabilize weighing results within an ultra fast 10 seconds, for maximum time savings with each weighing operation.
When you really have a weighing application there really is only one manufacturer to consider - SARTORIUS. Sartorius is a German company and maker of some of the world's finest balances since 1871 when they introduced the world's first pharmaceutical balance. Only Sartorius shatters the limits when "the Guinness Book of World Records" listed the Sartorius Model 4108 as the most accurate balance in the world. Sartorius has been proving their trustworthiness thanks to their top-of-the-line technology that ensures maximum accuracy. Sartorius products are manufactured with ISO9001 standards and have the CE mark. Sartorius' excellent reputation and image in the technologically sophisticated field of weighing balances make them a global leader.
Installation is always best on the ground level on a concrete foundation since installing the micro-balance on upper floor levels are more prone to the possibility of floor vibrations due structural motion and pedestrian movements. If you can't install your microbalance on the ground level installing the micro balance in a corner outside wall is the next best location. Always try to stay away from the middle of the floor since this area bends the most. Also the higher floor levels the balance is located, the greater the building sway and even slight misalignment along the vertical to the center of the earth can introduce substantial weighing error.
A high precision microbalance should always be installed in a low traffic area. Due to the expense of the micro balance it should be in a restricted area to lessen the chance of unauthorized people from touching or using the microbalance.
Install a ultra-micro and micro balances in quiet, temperature and humidity controlled, draft-free location is of paramount importance. Finding a location in cleanroom can many times be challenging due to laminar air flow. So before even considering purchasing a high precision laboratory balance you should consider the area you want to install the microbalance since if your environment is not ideal you don't have a defective microbalance but a defective environment. You can read more about selecting a location of your lab balance here.
Once you have an adequate environment installing the microbalance isn't difficult, but for those customers wishing for professional installation it is available at an additional cost. Please call us at 978-521-7095 for current prices for these services, but the average cost is $425 in the lower 48 states of the USA plus travel and expenses. IQ/OQ testing is also available for an average cost of $875 plus travel and expenses.
Purchasing a micro balance is an extremely costly purchase and sometime even more expensive is creating the proper environment. If you have any technical questions or want to check availability give the balance experts at Precision Weighing Balances a call at 978-521-7095.
Free shipping in the lower 48 states for the MSA2.7S0TRDF filter balance.
S&H via UPS Ground
Free shipping in the continuous 48 states of USA via UPS Ground Service
weighing filters with diameters of up to 50 mm/1.97 inches
Parts Counting, RS-232c, Internal Calibration, USB, Ethernet
Legal for Trade
No Legal for Trade
Solid Diecast Metal Base Housing, Stainless Steel Weighing Pan, Magnetic Force Motor Monolithic Weigh Cell
Motorized automatic internal calibration
RS-232, USB, Ethernet
Platform size (inches)
120V AC Adapter included
Manufacturer Warranty (years)
Cubis ultra micro filter balance weighing (2.1 grams x 0.1 micrograms) with TouchScreen display. Stainless steel manual draft shield for weighing filters with diameters of up to 50 mm/1.97 inches (75 mm & 90 mm optionally available)
You may also be interested in the following product(s)