Digtal scales from Sartorius, Mettler, Ohaus, AND Weighing, Myweigh & more

digital scale lab balances

Scaleman.com is your source for
balances & scales at discount prices
Since 1995!

Skip to Main Content »

The FG-23 interface allows FG-K bench scales to be connected with the AD8121B printer or a computer. The RS-232C interface has the following four modes. 1.Stream mode           Outputs data continuously. 2.Command mode     Controls the scale using commands from a computer. 3.Print switch mode   Outputs data by pressing the PRINT switch.. 4.Auto-print mode       Outputs data which meets the conditions of auto-print. Installation of FG-23 The FG-23 has an interface board, an option panel and a DIN 8 pin connector. The option panel and DIN connector are common to both options. Before installation, prepare an interface cable using attached DIN connector. Or there is a way to use the optional RS-232C cable (see "section 10-2 in the FG-K user manual"). 1. Disconnect the AC adapter from the scale. 2. Remove the four screws and the cover of option slot. 3. Thread the interface cable through the hole of option panel first, and connect the DIN connector to the interface board. 4. Connect the interface board to the connector in the display pod. 5. Attach and fix the option panel using the screws that removed in the step 2. This FG-23 RS-232 interface module works with the following models: [a href="http://balance.balances.com/scales/290"]FG-30KBMN[/a] [a href="http://balance.balances.com/scales/291"]FG-60KBMN[/a] [a href="http://balance.balances.com/scales/292"]FG-150KBMN[/a] [a href="http://balance.balances.com/scales/576"]FG-30KAMN[/a] [a href="http://balance.balances.com/scales/578"]FG-60KAMN[/a] [a href="http://balance.balances.com/scales/185"]FG-150KAMN[/a] [a href="http://balance.balances.com/scales/587"]FG-60KALN[/a] [a href="http://balance.balances.com/scales/189"]FG-150KALN[/a] [a href="http://balance.balances.com/scales/612"]FG-200KALN[/a] [a href="http://balance.balances.com/scales/593"]FG-30KBM[/a] [a href="http://balance.balances.com/scales/588"]FG-60KBM[/a] [a href="http://balance.balances.com/scales/293"]FG-150KBM[/a] [a href="http://balance.balances.com/scales/584"]FG-30KAM[/a] [a href="http://balance.balances.com/scales/597"]FG-60KAM[/a] [a href="http://balance.balances.com/scales/186"]FG-150KAM[/a] [a href="http://balance.balances.com/scales/598"]FG-60KAL[/a] [a href="http://balance.balances.com/scales/188"]FG-150KAL[/a] [a href="http://balance.balances.com/scales/613"]FG-200KAL[/a]Move your mouse over image or click to enlarge

More Views

AND FG23 RS232C Interface

AND
See other products by AND

Availability: In Stock

MSRP: $80.00

YOU PAY: $72.00

You save $8.00

Quick Overview

FG-23 RS232C interface allows FG-K bench scales to be connected with the AD8121B printer or a computer.

MSRP: $80.00

YOU PAY: $72.00

You save $8.00
Add Items to Cart

Product Description

The FG-23 interface allows FG-K bench scales to be connected with the AD8121B printer or a computer.

The RS-232C interface has the following four modes.

1.Stream mode           Outputs data continuously.
2.Command mode     Controls the scale using commands from a computer.
3.Print switch mode   Outputs data by pressing the PRINT switch..
4.Auto-print mode       Outputs data which meets the conditions of auto-print.


Installation of FG-23

The FG-23 has an interface board, an option panel and a DIN 8 pin connector. The option panel and DIN connector are common to both options. Before installation, prepare an interface cable using attached DIN connector. Or there is a way to use the optional RS-232C cable (see "section 10-2 in the FG-K user manual").

1. Disconnect the AC adapter from the scale.
2. Remove the four screws and the cover of option slot.
3. Thread the interface cable through the hole of option panel first, and connect the DIN connector to the interface board.
4. Connect the interface board to the connector in the display pod.
5. Attach and fix the option panel using the screws that removed in the step 2.

This FG-23 RS-232 interface module works with the following models:

FG-30KBMN
FG-60KBMN
FG-150KBMN
FG-30KAMN
FG-60KAMN
FG-150KAMN
FG-60KALN
FG-150KALN
FG-200KALN
FG-30KBM
FG-60KBM
FG-150KBM
FG-30KAM
FG-60KAM
FG-150KAM
FG-60KAL
FG-150KAL
FG-200KAL

 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Hot Buys!

Community Poll

What is your favorite balance ?
 
 
 
 
 
 
 
 
  Loading...
Featured Laboratory Balances:
600 g x 0.01 g $259.77
60 g x 0.1 mg $999.51