Sale

Sartorius ENTRIS 124i-1S with Internal Calibration

120 g x 0.0001 g

Sartorius ENTRIS 124i-1S analytical balance offers motorized internal calibration at a press of the keypad. 120 grams maximum weighing capacity and increments in 0.0001 gram graduations.

Availability: 0 left in stock. Usually ships in 2-4 days

MSRP: $2,830.00

YOU PAY: $1,719.99

You save $1,110.01

Useful Downloads
ENTRIS 124i-1S product brochure
Instruction Manual for the ENTRIS 124i-1S
Sartorius ENTRIS 124i-1S Datasheet
Sartorius ENTRIS124i-1S Spec sheet
Details
Details
Sartorius ENTRIS124i-1S analytical balance offers motorized internal calibration at a press of the keypad. 120 grams maximum weighing capacity and increments in 0.0001 gram graduations. That is 1/10,000th of a gram or 0.1 milligrams.

If you are looking to spend less money and willing to give up the motorized internal calibration for external calibration then see the Sartorius ENTRIS124-1S

The Entris124i-1S is a tremendous value - a fraction of the cost the model it replaces - the Sartorius ED124S. Sartorius Entris124i-1S analytical lab balance also allows you to perform specific gravity determination via a weigh below hanger or purchase an optional density kit for inside the enclosed glass weighing chamber.

When the Entris124i-1S analytical balance is first installed or when it is moved to another location, it should be calibrated to ensure accurate weighing results. Gravity is not the same everywhere on earth can also affect your weighing results. Every place in the world is positioned differently to "magnetic north." Differences in barometric pressure also creates slight gravitational differences, depending on your particular location's altitude compared to sea level. If the balance is moved to a place where the gravitational pull is greater or less, it will display a different value, as the force will vary. Small changes can mean big differences in your weight measurement results.

Simply press of the "Cal" button and the motorized internal calibration feature performs the calibration to adjust for your location and the affects of barometric pressure and magnetic north.

Depending on the use of the laboratory balance, the calibration may need to be traceable for ISO purposes or to meet other quality control requirements. In this instance, a certified weight should be used to calibrate the balance. In the United States, the National Institute of Standards and Technology is the industry group that certifies weights for calibration. A traceable calibration can be done through a balance service company that specializes in calibration certification, or it can be done by the balance owner providing they buy a certified weight to be used in the calibration process.

If your ISO requires you to perform calibration with an external traceable weight you can still do this with the Entris124i-1S. We always recommend you purchase an optional external 100 gram calibration weight so you can perform the external calibration.

Sartorius Entris analytical balances are also quick and easy to clean with its removable side-doors and stainless steel construction. This affordable balance has an easy to understand weighing display that is easy to read and ideal for efficient weighing in your lab. Sartorius digital laboratory balances save time by providing fast weighing results.

If you compare the specifications of many lab analytical balances on paper, they all look the same - if you've seen one, you've seen them all. But in the real world there is more to a lab analytical balance than just its technical specifications. The Sartorius Entris124i-1S has been specially designed for effective and reliable weighing in daily lab routines. This is where more powerful technology and application oriented operation and features make all the difference.

Using the latest technology. Sartorius utilizes 21st century technology, such as the unique robotically etched monolithic weigh cell, which ensures long-term high accuracy. Sartorius Entris series features the latest powerful microprocessor technology, shortening the response times for faster results. Reliable weighing results, all of the time - even under less than ideal ambient conditions, thanks to the Entris' highly sophisticated digital compensation algorithms.

Ease of use. When you need to get a heavy workload of repetitive applications done fast and reliably, day and day out, the last thing you need is a lab balance so complicated that it causes operating errors and wastes your valuable time as a result. Welcome to your Entris balance comfort zone: a simple, easy-to-understand control panel, key function assignments and the easy-to-read display are ideal for efficient weighing in your lab. User friendly operation: short, plain English text prompts and cursor keys for navigation make it simple for you to configure the balance to meet your individual requirements. Outstanding readouts thanks to the backlit and high-contrast display (height of digits: 15 mm). The level indicator is positioned conveniently right next to the display so that checking whether the balance is level becomes "second nature" to the operator.

Sartorius products are manufactured with ISO9001 standards and have the CE mark. Sartorius has been proving their trustworthiness thanks to their top-of-the-line technology that ensures maximum accuracy. Sartorius begin building balances in 1871 and holds the Guinness Book of World Record for the most accurate balance in the world. When you have an excellent reputation and image in the technologically sophisticated field of weighing metrology there is no question Sartorius should be your only choice.

The Sartorius Entris Series consists 3 Analytical models (4 decimal places), 4 Milligram Balances (3 decimal places), 5 Precision Balances (2 decimal places) & 3 Precision Scales (1 decimal place) and you can see the Complete Entris Series here.

The Sartorius Entris124i-1S is the reincarnation of the Sartorius Extend ED124S. The Sartorius Extend ED line was phased-out and replaced with the Sartorius Secura 124-1S, Quintix 124-1S or Practum 124-1S. The Secura, Quintix and Practum balances introduced in 2013 featured an entirely new cutting edge design offering with a touch screen display with graphical user interface. These new touch screen balances are very nice and offer advanced weighing applications, but they are also expensive and for some people they prefer tactile keypad buttons over a touchscreen.

While Sartorius focused on high end balances A&D Weighing & Ohaus brought to market the extremely affordable HR100AZ analytical balance. and Ohaus Pioneer PA124C Lab Scale. It now seems like Sartorius noticed a void in the entry level analytical weighing segment and in December 2015 Sartorius brought to the marketplace the Entris Series with internal calibration. The Sartorius Entris124i-1S is the same platform, housing, weigh sensor and embedded software as the Sartorius Extend. The Sartorius Entris features a new display overlay, new microprocessor and now is RoHS (Restriction of Hazardous Substances) compliant. The overall operation of the Extend and Entris are the same.

We understand purchasing an analytical balance is a major capital expense and if you have any questions give us a call and one of our weighing experts can discuss your weighing application and get you the most affordable balance for your weighing needs.

For a limited time we are offering Free shipping via UPS Ground in the lower 48 states for the Sartorius Entris124i-1S.



Sartorius Entris analytical balances display increments in 0.002 grains divisions. Long-range competitive shooters (600+ yards) always shoot for an edge over their rivals and one way is to shoot very uniform ammo. Weighing charges, bullets and primers to 0.002gn can make shot velocities more uniform within a shot string. Forget those inconsistent low cost strain gauge scales that weigh the same charge differently each time. If you want to win the competition you need every round to the exact kernel.

In the video above we will walk you through the steps to change the default factory setting of grams to grains. once you make these changes your balance will power up each time in the grains mode. In this demonstration we use the Entris224-1S, but the steps are the same for all Sat or ius Entris models.



In the video above we demonstrate the Sartorius Entris224-1S analytical balance and how easy calibration is when you purchase the optional calibration mass. The Sartorius Entris 4 decimal place balances offer a large draftshield with 3 sliding doors. See the quick settling time as we place calibration weights on the weighing platform. Get a better understanding of what each keypad does and how you can enter into the balance configuration menu to change the factory default setting to better meet your specific weighing requirements. The Sartorius Entris is easy to configure to optimize for your individual weighing application.

Specs
Capacity x Readability (g) 120 g x 0.0001 grams
Capacity x Readability (ct) 600 ct x 0.0005 carats
Capacity x Readability (lb) 0.264 lb x 0.000001 pounds
Capacity x Readability (oz) 4.232 oz x 0.000005 ounces
Capacity x Readability (ozt) 3.858 ozt x 0.000005 troy ounces
Capacity x Readability (gn) 1851.880 gn x 0.002 grains
Capacity x Readability (dwt) 77.16 dwt x 0.00005 pennyweight
Capacity x Readability (mg) 120000 mg x 0.1 milligrams
Capacity x Readability (N) 1.177 N x 0.000001 newtons
Repeatability (std deviation) ±0.1 mg
Linearity ± 0.2 mg
Response Time (average) 2.5 seconds
Tare Range FULL to Capacity
Selectable Weight Units g, kg, ct, lb, oz, ozt, tlh, tls, tlt, Gn, dwt, mg, /lb, tlc, mom, K, tol, bat, and MS.
Selectable Application Programs Toggle between 5 weight units, weigh average, calculation, dynamic animal weighing/averaging, net-total formulation, percent weighing, totalizing, density determination and counting
Display Update 0.1 - 0.4 seconds
Display LCD with backlit
Operating Temperature Range 50° F to 86° F (+10° C to +30° C)
Allowable Ambient Operating Temperature 41° F to 104° F (+5° C to +40° C)
Sensitivity Drift ±2 ppm / °C
Motorized Internal Calibration YES
External Calibration Requires Optional 100 gram calibration weight
Pan Size ø 3.5" in / ø 90 mm
Draft Shield Chamber Height
230 mm / 9" inch
*Note draftshield is not removable
Dimensions (entire balance)
W x D x H
9" x 11.9" x 13" inches
230 x 303 x 330 mm
Built-in RS-232 Interface YES
Weighing Below A port for a hanger for weighing below the balance is available (requires purchase of optional accessory - 3 mm weigh below hook). You can attach a sample using a suspension wire, for example. Common applications for weighing below the balance includes density determination.
Power Source 120 VAC AC adapter
Power Consumption (VA) maximum 16; typical 8 (STNG6)
Approx. hours of operation with YRB05Z rechargeable battery pack (backlighting on) 35 hours (requires purchase of optional YRB05Z rechargeable battery pack)
Standard Equipment AC Adapter, Sliding-door draft shield, Shield ring, Shield plate, Dust Cover
Optional Accessories 100 gram weight, RS-232 cable, USB interface kit, external calibration weights, weigh below hook, printer, external rechargeable battery pack, Density determination kit, 13" x 15" Granite isolator slab
What's included
AC Adapter
Dust Cover
User Manual
You May Also Like
You may also be interested in the following product(s)
Sartorius Secura124-1S analytical balance Sartorius Secura124-1S analytical balance

MSRP: $3,820.00

YOU PAY: $2,549.94

Lab Balance Sartorius MSE124S-100-DU Lab Balance Sartorius MSE124S-100-DU

MSRP: $5,350.00

YOU PAY: $4,815.00

OHAUS AX124 Adventurer Scientific Balance OHAUS AX124 Adventurer Scientific Balance

MSRP: $3,090.00

YOU PAY: $2,626.50

Sartorius Quintix124-1S analytical balance Sartorius Quintix124-1S analytical balance

MSRP: $3,380.00

YOU PAY: $2,249.83

Sartorius Entris 224-1S laboratory balance Sartorius Entris 224-1S laboratory balance

MSRP: $2,355.00

YOU PAY: $1,458.36

Ohaus EX124 Analytical Balance Ohaus EX124 Analytical Balance

MSRP: $3,767.00

YOU PAY: $3,201.95

Sartorius Entris 124-1S analytical balance Sartorius Entris 124-1S analytical balance

MSRP: $2,120.00

YOU PAY: $1,149.94

Cubis MSA124S-100-DU Monolithic Balance Cubis MSA124S-100-DU Monolithic Balance

MSRP: $7,075.00

YOU PAY: $6,367.50

Sartorius ENTRIS 64i-1S with Internal Calibration Sartorius ENTRIS 64i-1S with Internal Calibration

MSRP: $2,410.00

YOU PAY: $1,469.44

Sartorius Secura224-1S analytical balance Sartorius Secura224-1S analytical balance

MSRP: $4,240.00

YOU PAY: $2,829.95

Sartorius Cubis MSU124S-100-DU Balance Sartorius Cubis MSU124S-100-DU Balance

MSRP: $6,455.00

YOU PAY: $5,809.50

AND Weighing HR100AZ with Internal Calibration AND Weighing HR100AZ with Internal Calibration

MSRP: $2,240.00

YOU PAY: $1,680.00

Sartorius Quintix224-1S lab balance Sartorius Quintix224-1S lab balance

MSRP: $3,825.00

YOU PAY: $2,555.84

AND GH120 analytical lab balance AND GH120 analytical lab balance

MSRP: $3,540.00

YOU PAY: $2,832.00

Ohaus Pioneer PA124C Lab Scale Ohaus Pioneer PA124C Lab Scale

MSRP: $2,290.00

YOU PAY: $1,946.50

Mettler Toledo JS703C/A digital carat balance Mettler Toledo JS703C/A digital carat balance

MSRP: $2,395.00

YOU PAY: $1,840.00

Sartorius Entris 64-1S analytical balance Sartorius Entris 64-1S analytical balance

MSRP: $1,770.00

YOU PAY: $1,094.51

Laboratory balance AND GR120 Laboratory balance AND GR120

MSRP: $3,015.00

YOU PAY: $2,261.25

Sartorius Entris 224i-1S Internal Calibration Sartorius Entris 224i-1S Internal Calibration

MSRP: $3,145.00

YOU PAY: $1,899.13

Sartorius Practum124-1S analytical balance Sartorius Practum124-1S analytical balance

MSRP: $2,385.00

YOU PAY: $1,498.85

Scientech ZSA120 precision balance Scientech ZSA120 precision balance

MSRP: $1,895.00

YOU PAY: $1,795.00

AND Weighing HR150AZ Internal Calibration AND Weighing HR150AZ Internal Calibration

MSRP: $2,350.00

YOU PAY: $1,762.50

Additional Info
Additional Info
Brand Sartorius
Capacity x Readability 120 g x 0.0001 g
Readability 0.0001 g
Weight Modes Carats, Grains, Milligrams, Pounds, Ounces, Pennyweight, Grams, Troy Ounces, KiloGrams
Functions Averaging, Formulation, Percent Weighing
Features Parts Counting, RS-232c, Internal Calibration
Legal for Trade No Legal for Trade
Construction ABS Plastic Housing, Stainless Steel Weighing Pan, LCD Display, Magnetic Force Motor Monolithic Weigh Cell
Calibration One button motorized internal calibration
Communication RS-232, Aftermarket DB9 RS-232 Adapter Converter with USB Cable can be purchased
Platform size (inches) 3.5 diameter
Power Requirements 120V AC Adapter included
Manufacturer Warranty (years) 2
Additional info You can toggle between 5 different weigh modes
Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...