Sale

grip handle 25lb scale test weight

25 lb grip handle weight, Class F, Tolerance ± 1.1 g, 2 piece construction with handle, cast iron. Test weight does not come with certificate but one may be purchased for an additional cost by clicking the box below.

Availability: 0 left in stock. Usually ships in 2 weeks

MSRP: $125.00

YOU PAY: $105.00

You save $20.00

Useful Downloads
Calibration certificate comparison table
Traceable certificate SAMPLE
NVLAP calibration certificate SAMPLE

* Required Fields

Details
Details
25 pound grip handle weight is ideal for calibrating commercial scales that require a 25 lb calibration weight. Class F NO CERTIFICATE (available at additional cost). The grip handle weight is made from cast iron and include an adjustment cavity on the side of the weight. The approximate dimensions of the weight is 4.75 x 6.19 x 5.19 inches and tolerance of ± 1.1 grams.

This Class F calibration weight is primarily used to test commercial weighing devices by state and local weights and measures officials, device installers and service technicians. Class F weights may be used to test most accuracy Class III scales, all scales of Class IIIL or IIII, and scales not marked with a class designation.

Please note if your company has a quality assurance program you will probably need to purchase the OPTIONAL Certificate to meet compliance of regulatory and quality control requirements. We highly recommend you check with your regulatory compliance officer or ISO Auditor for guidance for your specific quality assurance/quality control requirements or when in doubt just purchase the OPTIONAL NVLAP Calibration Certificate.

Traceable Certificate is designed for those laboratories and companies that require traceability, but do not need to meet any stringent regulatory requirements. The Traceable Certificate measurement process is based on a single standard and utilizes one series of comparisons.

If you are required to meet standards including NVLAP Handbook 150-2, ISO/IEC 9000, ISO/IEC 17025, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1, and nuclear requirement a Traceable Certificate will NOT meet the compliance requirements. We always recommend you check with your regulatory or compliance officer to verify what quality or regulatory requirements must be meet before ordering any calibration weights. We always like to say when in doubt purchase weights with the NVLAP Certificate.

Weights are the most frequently used and most important equipment for testing scales and balances. Routine testing for weighing devices like balances and scales is critical to ensuring accurate weighing results and maintaining quality control standards. By placing various test weights you can verify a balance meets the process tolerance in-between regular scale calibrations. Care should always be taken when using test weights by never touching the weight with bare hands (grease and dirt can transfer from fingers to weight) and never slide weights across the weighing platform since you can change the conventional mass value.
--------------

Report of Traceability - This report identifies:

  • Tolerance class
  • Type of construction
  • NIST test number
  • Date of applicable primary standard(s)
  • Secondary set number
  • Includes technician's signature
  • Description of the weight(s)
  • Test Number
  • Serial Number
  • Nominal Value
  • Uncertainty of the measurement tolerance
  • Information on weighing procedures
  • Date the primary standards were last tested at NIST and the NIST test number
  • Date and test number for our working standards.
  • Statement of compliance to ANSI/NCSL Z540 and ANSI/ISO/IEC 17025
  • NVLAP Accreditation Logo and laboratory code.
  • Statement of traceability to the International Prototype Kilogram (IPK) this meets the international requirement for traceability to the International System of Units
--------------

Certificate of Calibration - The Certificate of Calibration includes everything found in a Report of Traceability listed above with the additional information listed below:

  • Uncertainty value
  • Test conditions temperature, barometric pressure, humidity
  • Conventional Mass Correction
  • Uncertainty of the measurement
  • Identification of the balance used in the calibration
  • as found value if an adjustment is performed
  • assumed density of the weight
  • material weight is made from
  • Pass/Fail result of magnetic testing
  • Volume of the weight
  • Cubical Coefficient of expansion
  • True Mass correction
--------------

Difference between Traceability and Certificate of Calibration?

The major difference between the Report of Traceability and the Calibration Certificate is the Report of Traceability is a tolerance test and is only available for new weights. The Certificate of Calibration is a full report of the parameters tested. Above we outline what comes with each report. The Certificate of Calibration will, however, give a smaller uncertainty and a more precise value of the actual mass due to the multiple measurements that are made during the calibrating process. If you require a accredited laboratory certificate to meet ISO/IEC 17025 & ANSI/NCSC Z540-1 the you need a NVLAP Certificate of Calibration.

To get all the accuracy your electronic balance or digital scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. ASTM stainless steel electronic balance calibration weights possessing closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and damage through handling. All of Troemner's Electronic Balance Calibration Weights are type II which have an adjusting cavity to allow for adjustment during future calibrations. Within the weight there is a cavity that is filled with adjusting material, typically the same material from which the weight is made. This cavity is sealed during the production process to ensure the stability of the weight. Electronic Balance Calibration Weights are cylindrical in shape and flat on top, to stack easily on center.

Selecting The Right Weight:

- Check you scale's manual or specification sheet to find the weight value required to calibrate your scale.

- It is recommended that the weight selected to calibrate a balance and/or scale have a tolerance small enough as not to be detected by the balance and/or scale. Troemner recommends the tolerance of a weight selected for calibrating a balance and/or scale is no more than 1/3 of the readability or precision of the balance and/or scale being calibrated. If this cannot be achieved, it is suggested that a Class 1 Electronic Balance Calibration Weight with a NVLAP certificate be ordered which provides the actual mass value for the weight which reduces measurement uncertainty.

Product photo may not exactly match the product offered for sale.

We also offer a huge selection of Laboratory Calibration Weights and Calibration Mass Sets with Calibration certification and NIST Traceable Calibration for lab balances.

All calibration weights are not returnable. Once your order has been placed it CAN NOT be cancelled. Please carefully consider this prior to placing your order. The reason for this is these weights are custom manufactured and are certified on the date they were made. In addition, if you touch the calibration weight with your fingers the oil in your skin would change the tolerance and we can not take this chance if the weight was returned.
Specs
Description: Avoirdupois Cast Iron Grip Handle Weights
Weight: 25 lb
Tolerance: ± 1.1 g
Class: Class F
Certification: Troemner NO LONGER offers Statement of Accuracy. OPTIONAL Traceability Certificate or NVLAP Calibration Certificate available at ADDITIONAL COST
Material: Cast iron
Construction: 2 piece construction with handle
Case: Weights not supplied with case
You May Also Like
You may also be interested in the following product(s)
5KG cylindrical calibration weight 5KG cylindrical calibration weight

MSRP: $385.00

YOU PAY: $344.00

grip handle 10 pound calibration mass grip handle 10 pound calibration mass

MSRP: $84.00

YOU PAY: $71.00

Grip Handle Calibration Weight 20kg Class1 Grip Handle Calibration Weight 20kg Class1

MSRP: $1,499.00

YOU PAY: $1,305.00

20 kilogram stainless steel grip weight 20 kilogram stainless steel grip weight

MSRP: $1,360.00

YOU PAY: $1,199.00

2 kilogram grip handle calibration weight 2 kilogram grip handle calibration weight

MSRP: $73.00

YOU PAY: $66.00

5 LB cast iron weight class 7 no certificate 5 LB cast iron weight class 7 no certificate

MSRP: $78.00

YOU PAY: $65.00

Avoirupois 30 lb calibration weight Avoirupois 30 lb calibration weight

MSRP: $195.00

YOU PAY: $163.00

30 Kilogram Grip Weight Class 1 30 Kilogram Grip Weight Class 1

MSRP: $2,072.00

YOU PAY: $1,795.00

30KG Grip Weight Class 2 Stainless Steel 30KG Grip Weight Class 2 Stainless Steel

MSRP: $1,845.00

YOU PAY: $1,585.00

cast iron grip handle 10kg cal weight cast iron grip handle 10kg cal weight

MSRP: $140.00

YOU PAY: $129.00

100 LB cast iron grip handle weight 100 LB cast iron grip handle weight

MSRP: $599.00

YOU PAY: $488.00

8 kilogram calibration test weight 8 kilogram calibration test weight

MSRP: $900.00

YOU PAY: $785.00

50LB Grip Weight Class F Stainless Steel 50LB Grip Weight Class F Stainless Steel

MSRP: $938.00

YOU PAY: $796.00

cast iron 25 kilogram grip test weight cast iron 25 kilogram grip test weight

MSRP: $190.00

YOU PAY: $172.00

Mass Calibration - Weights 4kg Class 1 Mass Calibration - Weights 4kg Class 1

MSRP: $395.00

YOU PAY: $369.00

4 kilogram balance calibration weight 4 kilogram balance calibration weight

MSRP: $375.00

YOU PAY: $319.00

1 LB Cast Iron Weight 1 LB Cast Iron Weight

MSRP: $62.00

YOU PAY: $55.00

5 pound cast iron scale test weight 5 pound cast iron scale test weight

MSRP: $66.00

YOU PAY: $56.00

Calibration Weights 10KG Class 1 Calibration Weights 10KG Class 1

MSRP: $985.00

YOU PAY: $879.00

10KG stainless steel test weight 10KG stainless steel test weight

MSRP: $875.00

YOU PAY: $799.00

20 pound cast iron calibration weight 20 pound cast iron calibration weight

MSRP: $97.00

YOU PAY: $86.00

Grip Handle Weight 25kg Class 1 Grip Handle Weight 25kg Class 1

MSRP: $1,787.00

YOU PAY: $1,545.00

25KG Grip Weight Class 2 Stainless Steel 25KG Grip Weight Class 2 Stainless Steel

MSRP: $1,565.00

YOU PAY: $1,338.00

metric 5 kg cast iron calibration weight metric 5 kg cast iron calibration weight

MSRP: $90.00

YOU PAY: $81.00

10 KG Grip Weight Class F no certificate 10 KG Grip Weight Class F no certificate

MSRP: $155.00

YOU PAY: $130.00

50 pound scale calibration weight 50 pound scale calibration weight

MSRP: $176.00

YOU PAY: $147.00

5KG Grip Weight Class 2 5KG Grip Weight Class 2

MSRP: $575.00

YOU PAY: $495.00

20 kg scale calibration weight 20 kg scale calibration weight

MSRP: $150.00

YOU PAY: $136.00

3 kilogram Class 1 Weight 3 kilogram Class 1 Weight

MSRP: $315.00

YOU PAY: $288.00

stainless steel 3kg calibration mass stainless steel 3kg calibration mass

MSRP: $305.00

YOU PAY: $270.00

3kg Class 1 Calibration Weight 3kg Class 1 Calibration Weight

MSRP: $470.00

YOU PAY: $438.00

50 kg class F cast iron test weight 50 kg class F cast iron test weight

MSRP: $650.00

YOU PAY: $560.00

Grip Handle Test Weights 5KG Class 1 Grip Handle Test Weights 5KG Class 1

MSRP: $725.00

YOU PAY: $685.00

Additional Info
Additional Info
Brand Troemner
Construction 2 piece construction with handle , Cast Iron
Additional info ASTM Class F, Tolerance ± 1.1g, Certificate available at an additional cost
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...