Sale

Balance calibration weight - 2 kg - Class 1 NVLAP certificate

Balance calibration weight 2 kg Class 1 NVLAP, tolerance ± 5 mg, made in 2 pieces from stainless steel. Balance testing weight comes with NVLAP traceability certificate included.

Availability: 0 left in stock. Usually ships in 2 weeks

MSRP: $335.00

YOU PAY: $287.00

You save $48.00

Useful Downloads
Calibration certificate comparison table
NVLAP calibration certificate SAMPLE
Details
Details
Stainless steel electronic balance calibration weight 2 kg class 1 NVLAP certificate. Tolerance: ± 5 mg. Made of highly polished 303 stainless steel. 2 piece construction with a groove near the top for easier handling. Machined as straight cylinder with the adjusting cavity opening in the bottom of the weight. Supplied with impact-resistant polypropylene case and cotton glove for handling the calibration weight so the oil in your skin does not change the weight's tolerance of ± 5 mg

To get all the accuracy your electronic scales or digital balances provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose.

Troemner 2 kilograms Class 1 Calibration Mass can be used to calibrate milligram balances or precision balances including the Sartorius Cubis MSU2203S-100-DE milligram balance, Sartorius ENTRIS 2201-1S digital scale or AND EJ2000 precision weighing scale.

ASTM stainless steel electronic balance calibration weights possessing closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and damage through handling. All of Troemner's Electronic Balance Calibration Weights are type II which have an adjusting cavity to allow for adjustment during future calibrations. Within the weight there is a cavity that is filled with adjusting material, typically the same material from which the weight is made. This cavity is sealed during the production process to ensure the stability of the weight. Electronic Balance Calibration Weights are cylindrical in shape and flat on top, to stack easily on center.

calibration weight shape

Construction and General Shape:

Troemner's Electronic Balance Calibration Weights are manufactured from the highest quality stainless steel alloy, possessing closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and damage through handling. All of Troemner's Electronic Balance Calibration Weights are type II which have an adjusting cavity to allow for adjustment during future calibrations. Within the weight there is a cavity that is filled with adjusting material, typically the same material from which the weight is made. This cavity is sealed during the production process to ensure the stability of the weight. Electronic Balance Calibration Weights are cylindrical in shape and flat on top, to stack easily on center.

- Grip handle weights from 5 kg to 30 kg have a recess in the top center of the weight with a lifting handle spanning the recess slightly below the top surface of the weight. The recess allows the user to pick up the weight using the handle and provides clearance for the user's hand. Grip handle weights 5 kg to 10 kg are 5 inches in diameter. Grip handle weights above 10 kg to 30 kg are 6 inches in diameter. The adjusting cavity for grip handle weights is within the lifting handle.

- Cylindrical weights from 1 kg to 5 kg are machined as cylinders and have a groove around the diameter approximately 25% from the top of the weight to allow for easier handling. The adjusting cavity opening is in the bottom of the weight for the 1 kg weight and on the top of the weight for the 2 kg through 5 kg.

- Weights from 200 g to 500 g are machined as straight cylinders with the adjusting cavity opening in the bottom of the weight.

calibration weights for balance calibration

Surface Finish:

Troemner ANSI/ASTM Classes 1 and 2 have all surfaces polished to a perfect, mirror like finish.

calibration weight storage case

Polycarbonate Cases for Individual Weights:

To safeguard your Electronic Balance Weights, attractive, durable, high quality, polycarbonate cases are provided with weights 10 g through 5 kg. The polycarbonate cases feature a custom insert, bumper, and locking lid to assure weights are held securely within the case and avoid movement. Polycarbonate cases for grip weights & weights over 5kg are available at an additional cost.

Selecting The Right Weight:

- Check you scale's manual or specification sheet to find the weight value required to calibrate your scale.

- It is recommended that the weight selected to calibrate a balance and/or scale have a tolerance small enough as not to be detected by the balance and/or scale. Troemner recommends the tolerance of a weight selected for calibrating a balance and/or scale is no more than 1/3 of the readability or precision of the balance and/or scale being calibrated. If this cannot be achieved, it is suggested that a Class 1 Electronic Balance Calibration Weight with a NVLAP certificate be ordered which provides the actual mass value for the weight which reduces measurement uncertainty.

- Electronic Balance Calibration Weights can also be used to check or verify the accuracy of your balance and/or scale between calibrations. It is recommended that the user check a balance and/or scale prior to each use. Keeping the weight at or near the balance and/or scale keeps the weight at the same temperature as the equipment.

We also offer a huge selection of Laboratory Calibration Weights and Calibration Mass Sets with Calibration certification and NIST Traceable Calibration for lab balances.

All calibration weights are not returnable. Once your order has been placed it CAN NOT be cancelled. Please carefully consider this prior to placing your order. The reason for this is these weights are custom manufactured and are certified on the date they were made. In addition, if you touch the calibration weight with your fingers the oil in your skin would change the tolerance and we can not take this chance if the weight was returned.

Product photo may not exactly match the product offered for sale.

Specs
Size: 2 kg
Class: Class 1
Tolerance: 5 mg
Certification: NVLAP Accredited Certificate
Material: Highly polished 303 stainless steel
Construction: 2 piece construction with a groove near the top for easier handling.
Case: Polycarbonate Case
What's included
Class 1 NVLAP certificate
Polypropylene case
Cotton Glove for handling weight
You May Also Like
You may also be interested in the following product(s)
13 piece (1kg-1g) class 1 nvlap weight set  13 piece (1kg-1g) class 1 nvlap weight set

MSRP: $3,360.00

YOU PAY: $2,993.00

Grip Handle Test Weights 5KG Class 1 Grip Handle Test Weights 5KG Class 1

MSRP: $725.00

YOU PAY: $685.00

14 piece (2kg-1g) weight set astm class 1 nvlap 14 piece (2kg-1g) weight set astm class 1 nvlap

MSRP: $4,200.00

YOU PAY: $3,825.00

Grip Handle Weight 25kg Class 1 Grip Handle Weight 25kg Class 1

MSRP: $1,787.00

YOU PAY: $1,545.00

4 kilogram balance calibration weight 4 kilogram balance calibration weight

MSRP: $375.00

YOU PAY: $319.00

2kg Calibration Weight 2kg Calibration Weight

MSRP: $210.00

YOU PAY: $188.00

3kg Class 1 Calibration Weight 3kg Class 1 Calibration Weight

MSRP: $470.00

YOU PAY: $438.00

20 kilogram stainless steel grip weight 20 kilogram stainless steel grip weight

MSRP: $1,360.00

YOU PAY: $1,199.00

20g - 100mg Class 1 with NVLAP Accredited Certificate 20g - 100mg Class 1 with NVLAP Accredited Certificate

MSRP: $1,274.00

YOU PAY: $1,089.00

class 1 nvlap 26 piece (2kg-1mg) weight set  class 1 nvlap 26 piece (2kg-1mg) weight set

MSRP: $5,225.00

YOU PAY: $4,881.00

Calibration Weights 10KG Class 1 Calibration Weights 10KG Class 1

MSRP: $985.00

YOU PAY: $879.00

15 pc(2-2kg - 1g) class 1 nvlap weight set 15 pc(2-2kg - 1g) class 1 nvlap weight set

MSRP: $5,250.00

YOU PAY: $4,700.00

5kg Class 1 Calibration Weight 5kg Class 1 Calibration Weight

MSRP: $466.00

YOU PAY: $399.00

8 kilogram calibration test weight 8 kilogram calibration test weight

MSRP: $900.00

YOU PAY: $785.00

5KG cylindrical calibration weight 5KG cylindrical calibration weight

MSRP: $385.00

YOU PAY: $344.00

Additional Info
Additional Info
Brand Troemner
Construction 303 stainless steel
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...