Sale

300g calibration weight Class 2 nvlap certificate

300g calibration weight Class 2 NVLAP, tolerance ± 1.5 mg, stainless steel, two pieces, case included. 300 gram calibration weight comes with Class 2 NVLAP traceability certification.

Availability: 0 left in stock. Usually ships in 2 weeks

MSRP: $220.00

YOU PAY: $199.00

You save $21.00

Useful Downloads
Calibration certificate comparison table
NVLAP calibration certificate SAMPLE
Details
Details
300g calibration weight, cylindrical shape, Class 2 with NVLAP certificate. Tolerance: ± 1.5 mg. This cylindrical weight is made of highly polished 316 stainless steel. 2 piece construction machined as straight cylinders with the adjusting cavity opening in the bottom of the weight.. Supplied with impact-resistant polypropylene case and cotton glove for handling the calibration weight so the oil in your skin does not change the weight's tolerance of ± 1.5 mg.

To get all the accuracy your electronic scales or digital balances provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose.

Troemner 300 gram Class 2 Calibration Mass can be used to calibrate high resolution analytical balances, milligram balances or precision balances including the AND GH300 Anti-static analytical balance, AND FZ300iWP milligram weighing balance or AND EJ300 Precision scale.

ASTM stainless steel electronic balance calibration weights possessing closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and damage through handling. All of Troemner's Electronic Balance Calibration Weights are type II which have an adjusting cavity to allow for adjustment during future calibrations. Within the weight there is a cavity that is filled with adjusting material, typically the same material from which the weight is made. This cavity is sealed during the production process to ensure the stability of the weight. Electronic Balance Calibration Weights are cylindrical in shape and flat on top, to stack easily on center.

calibration weight shape

Construction and General Shape:

Troemner's Electronic Balance Calibration Weights are manufactured from the highest quality stainless steel alloy, possessing closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and damage through handling. All of Troemner's Electronic Balance Calibration Weights are type II which have an adjusting cavity to allow for adjustment during future calibrations. Within the weight there is a cavity that is filled with adjusting material, typically the same material from which the weight is made. This cavity is sealed during the production process to ensure the stability of the weight. Electronic Balance Calibration Weights are cylindrical in shape and flat on top, to stack easily on center.

- Grip handle weights from 5 kg to 30 kg have a recess in the top center of the weight with a lifting handle spanning the recess slightly below the top surface of the weight. The recess allows the user to pick up the weight using the handle and provides clearance for the user's hand. Grip handle weights 5 kg to 10 kg are 5 inches in diameter. Grip handle weights above 10 kg to 30 kg are 6 inches in diameter. The adjusting cavity for grip handle weights is within the lifting handle.

- Cylindrical weights from 1 kg to 5 kg are machined as cylinders and have a groove around the diameter approximately 25% from the top of the weight to allow for easier handling. The adjusting cavity opening is in the bottom of the weight for the 1 kg weight and on the top of the weight for the 2 kg through 5 kg.

- Weights from 200 g to 500 g are machined as straight cylinders with the adjusting cavity opening in the bottom of the weight.

calibration weights for balance calibration

Surface Finish:

Troemner ANSI/ASTM Classes 1 and 2 have all surfaces polished to a perfect, mirror like finish.

calibration weight storage case

Polycarbonate Cases for Individual Weights:

To safeguard your Electronic Balance Weights, attractive, durable, high quality, polycarbonate cases are provided with weights 10 g through 5 kg. The polycarbonate cases feature a custom insert, bumper, and locking lid to assure weights are held securely within the case and avoid movement. Polycarbonate cases for grip weights & weights over 5kg are available at an additional cost.

Selecting The Right Weight:

- Check you scale's manual or specification sheet to find the weight value required to calibrate your scale.

- It is recommended that the weight selected to calibrate a balance and/or scale have a tolerance small enough as not to be detected by the balance and/or scale. Troemner recommends the tolerance of a weight selected for calibrating a balance and/or scale is no more than 1/3 of the readability or precision of the balance and/or scale being calibrated. If this cannot be achieved, it is suggested that a Class 1 Electronic Balance Calibration Weight with a NVLAP certificate be ordered which provides the actual mass value for the weight which reduces measurement uncertainty.

- Electronic Balance Calibration Weights can also be used to check or verify the accuracy of your balance and/or scale between calibrations. It is recommended that the user check a balance and/or scale prior to each use. Keeping the weight at or near the balance and/or scale keeps the weight at the same temperature as the equipment.

We also offer a huge selection of Laboratory Calibration Weights and Calibration Mass Sets with Calibration certification and NIST Traceable Calibration for lab balances.

Product photo may not exactly match the product offered for sale. Please refer to the "Specs" tab for more details on material & construction.

All calibration weights are not returnable. Once your order has been placed it CAN NOT be cancelled. Please carefully consider this prior to placing your order. The reason for this is these weights are custom manufactured and are certified on the date they were made. In addition, if you touch the calibration weight with your fingers the oil in your skin would change the tolerance and we can not take this chance if the weight was returned.

Specs
Description:   Metric Precision Individual Weight
Weight:   300 g
Class:   Class 2
Certification:   NVLAP Certificate
Material:   Highly polished 316 stainless steel
Construction:   2 piece construction
Case:   Supplied with impact-resistant polypropylene case.
What's included
NVLAP Accredited Certificate
Polycarbonate Case
Cotton Glove for handling weight
You May Also Like
You may also be interested in the following product(s)
50 gram cal mass Class 1 NVLAP certificate 50 gram cal mass Class 1 NVLAP certificate

MSRP: $165.00

YOU PAY: $144.00

300 grams stainless steel calibration weight 300 grams stainless steel calibration weight

MSRP: $103.00

YOU PAY: $87.00

300g Calibration Weight Stainless Steel 300g Calibration Weight Stainless Steel

MSRP: $115.00

YOU PAY: $98.00

500 gram scale calibration weight 500 gram scale calibration weight

MSRP: $125.00

YOU PAY: $109.00

24 piece (500g-1mg) weight set class 1 nvlap 24 piece (500g-1mg) weight set class 1 nvlap

MSRP: $3,620.00

YOU PAY: $3,200.00

50 gram lab scale calibration mass 50 gram lab scale calibration mass

MSRP: $75.00

YOU PAY: $68.00

500g Class 2 Calibration Weight with NVLAP 500g Class 2 Calibration Weight with NVLAP

MSRP: $240.00

YOU PAY: $219.00

40 gram weight Class 1 NVLAP cert 40 gram weight Class 1 NVLAP cert

MSRP: $165.00

YOU PAY: $144.00

100 gram cal mass Class 1 NVLAP certificate 100 gram cal mass Class 1 NVLAP certificate

MSRP: $165.00

YOU PAY: $139.00

balance calibration 400 gram weight balance calibration 400 gram weight

MSRP: $130.00

YOU PAY: $110.00

300g calibration weight Class 1 with NVLAP 300g calibration weight Class 1 with NVLAP

MSRP: $238.00

YOU PAY: $199.00

NVLAP 12 Piece (500g-1g) Weight Set Class 1 NVLAP 12 Piece (500g-1g) Weight Set Class 1

MSRP: $2,525.00

YOU PAY: $2,343.00

100 gram lab balance calibration weight 100 gram lab balance calibration weight

MSRP: $80.00

YOU PAY: $72.00

200 Gram Class 1 Weight 200 Gram Class 1 Weight

MSRP: $102.00

YOU PAY: $89.00

Additional Info
Additional Info
Brand Troemner
Construction 316 stainless steel
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...