AND GF8K industrial balance

8100 g x 0.01 g

GF8K digital industrial weighing scale, 8kg weighing capacity, 0.01g readability, rs232 interface,ip65 rated housing is water and dust resistant, underhook weighing.

Availability: 2 left in stock. In Stock

MSRP: $3,375.00

YOU PAY: $2,599.00

You save $776.00

Useful Downloads
Download Manual
Download Brochure
You Tube
Free shipping UPS Ground in the lower 48 states for all A&D GF-K Series Precision Industrial Balances.

Design, features, quality and price. Attributes we feel no other precision balance manufacturer can match when you compare the GF8K against the competitors models. This is a true high precision balance that meets IP-65 ratings for water and dust proof. Larger 10.6" x 8.3" weigh pan and 8,100 grams weighing capacity with readability to 0.01 gram. Yes - this means the balance increments in 0.01 gram interval all the way over the complete 8200 gram range.

AND Weighing GF8K splash proof precision balance meets IP-65 requirements. Dust-tight and protected against water jets allows for the GF-8K to be washed with water and causing no harm at all this this high precision industrial balance. IP-65 Rating - The "6" means "Dust tight. No ingress of dust." The "5" means "Protected against water jets. Water projected by a nozzle against the enclosure from any direction shall have no harmful effect."

Fast Super Hybrid Sensor (SHS) gives you the ultimate in response speed - Just 1.5 Seconds! SHS combines the best of magnetic force restoration and single point parallelogram load cell technologies. If the time ever comes where the SHS needs repair, you just replace one of three parts - there is no need to replace the whole weigh sensor as is the case with higher priced, slower competitive models. This new, innovative sensor is a core technology certain to dominate in the 21st century.

Made in Japan by A&D Weighing, a global manufacturer of high precision instrumentation, with facilities in Milpitas, California and Norcross, Georgia to back and support the 60 month manufacturer warranty.

Standard built-in RS-232 interface allows you to easily connect the balance to a PC with included WinCT software included with all A&D laboratory balances. You can import the data into your PC software, such as Windows based Word/Excel software. This balance data communication software is included as standard equipment unlike other manufacturers.

Need to use the balance in a area without a computer?? No problem A&D the standard RS-232 interface can be tied into the optional 8121B data printer to meet your GLP/GMP requirements.

GF-K Series offers external calibration only and requires the purchase of the optional calibration weight(s) if you desire to calibrate the balance. Animal weighing for maximum accuracy, the entire GX-K / GF-K Series can be programmed to average readings over a set period of time -- ideal for weighing lab animals or for work in unstable environments.

Multiple weighing modes available by simply pressing the "Mode" key and scroll through the desired weigh unit whether it is grams, ounce, pounds & more.

Never heard of A&D? A&D is currently the world's third largest manufacturer of laboratory and industrial balances with 20% of the world market share. Established in 1977, A&D Company, Ltd. has grown from developing digital-to-analog converters for companies such as Nippon Telegraph & Telephone, to becoming a world class producer of advanced measuring equipment for medicine, science and industry. A&D established itself as a multinational corporation, with offices in the United States, Great Britain, Germany, Australia, Korea, Taiwan and Russia, and as a world leader in measurement equipment. The company's competitive edge is the direct result of its ability to leverage strong engineering and manufacturing capabilities, while incorporating highly accurate analog and digital technologies into broad product lines focused to provide customers with the greatest value.

High performance and quality is shown with a 5 year manufacturer warranty. Review the manufacturer warranty from other manufacturer's and you'll see their warranty is a lot less. Plus if you ever need repair A&D Weighing has two facilities in the USA located in Georgia and California for fast turn around.

A&D is a technology driven, market oriented, global manufacturer of measurement equipment; sensitive to multi-national needs, and always providing ...Clearly a Better Value.

We understand purchasing a high capacity precision balance is a major capital expense and if you have any questions give us a call and we can discuss your weighing application and get you the most affordable balance for your weighing needs.

Free shipping UPS Ground in the lower 48 states for all A&D GF-K Series Precision Industrial Balances.

Weighing capacity 8.1 kg
Resolution 0.01 g
(Std. Deviation)
0.01 g
Grams (g) 8100.00 x 0.01
Decimal ounces (oz) 285.7190 x 0.0005
Troy ounce (ozt) 260.4210 x 0.0005
Pennyweight (dwt) 5208.42 x 0.01
Carat (ct) 40500.00 x 0.05
Grains (GN) 125002.2 x 0.2
Pounds (lb) 17.85745 x 0.00005
Linearity ± 0.02 g
Stabilization Time 1.5 seconds (Typical in FAST mode)
Sensitivity Drift (10° C-30° C/50° F-86° F) ± 2 ppm / °C
Accuracy right after calibration using internal mass ± 0.15 g
Weighing data of data memory 40 data, data with Time & date
NOT Available
Operating Temperature 5° C to 40° C (41° F to 104° F),
85% RH or less
Sensing Method Super Hybrid Sensor (SHS)
Display Type Vacuum Fluorescent Display (VFD)
Display Refresh rates 5 times/second or 10 times/second
Weighing units and modes g, kg, lb, lb:oz, ct, dwt, ozt, mm, TL, Ms, t, and percent % and counting PCS
Counting Mode Minimum unit mass 0.01 g
Number of samples 10, 25, 50 or 100 pieces
Percent Mode Mini. 100% reference mass 1 g
Min. 100% display 0.01%, 0.1%, 1% Depends on the reference mass stored
Standard interface RS-232C Serial interface with Windows Communication Tools (WinCT)
Recommended External
Calibrating Weight
2 kg, 3 kg, 4 kg, 5 kg, 6 kg, 7 kg, 8 kg
Water & Dust proof level Compliance with IP-65 covers the entire device
Weighing Pan Stainless steel weighing pan 270mm x 210mm / 10.6 inches x 8.27 inches (Wash down type)
Calibration External calibration ONLY. Requires the purchase of optional external weights
External Dimensions 300(W) x 355(D) x 111(H) mm
11.81" x 13.98" x 4.37"
AC adapter 120V AC adapter
Power Consumption Approx. 11VA (supplied by AC adapter)
What's included
AC adapter
You May Also Like
You may also be interested in the following product(s)
Scientech SG8000 Precision Balance Scientech SG8000 Precision Balance

MSRP: $2,185.00

YOU PAY: $1,995.95

Sartorius Secura6102-1S Balance Sartorius Secura6102-1S Balance

MSRP: $3,605.00

YOU PAY: $2,548.27

AND GF20K precision balance AND GF20K precision balance

MSRP: $3,240.00

YOU PAY: $2,495.00

Ohaus EX6202 Toploader Digital Laboratory Balance Ohaus EX6202 Toploader Digital Laboratory Balance

MSRP: $3,718.00

YOU PAY: $3,160.30

AND GX8K2 precision industrial balance AND GX8K2 precision industrial balance

MSRP: $3,085.00

YOU PAY: $2,313.75

Sartorius MSU8202S-000-D0 toploading balance Sartorius MSU8202S-000-D0 toploading balance

MSRP: $6,505.00

YOU PAY: $5,854.50

AND GF6100 Precision balance AND GF6100 Precision balance

MSRP: $2,750.00

YOU PAY: $2,062.50

Sartorus Cubis MSE10202S-000-D0 Sartorus Cubis MSE10202S-000-D0

MSRP: $6,290.00

YOU PAY: $5,661.00

AND GX6100 Precision balance AND GX6100 Precision balance

MSRP: $2,925.00

YOU PAY: $2,252.00

Sartorius Quintix6102-1S Scale Sartorius Quintix6102-1S Scale

MSRP: $3,535.00

YOU PAY: $2,539.48

AND GF32K precision balance AND GF32K precision balance

MSRP: $2,880.00

YOU PAY: $2,218.00

Sartorius ENTRIS 6202-1SUS balance Sartorius ENTRIS 6202-1SUS balance

MSRP: $1,805.00

YOU PAY: $1,195.20

AND GF12K precision weighing balance AND GF12K precision weighing balance

MSRP: $3,035.00

YOU PAY: $2,337.00

Sartorius MSE8202S-000-D0 lab scale Sartorius MSE8202S-000-D0 lab scale

MSRP: $5,400.00

YOU PAY: $4,860.00

AND GX8K industrial balance AND GX8K industrial balance

MSRP: $3,570.00

YOU PAY: $2,677.50

Sartorius Cubis MSA8202S-000-D0 balance Sartorius Cubis MSA8202S-000-D0 balance

MSRP: $7,125.00

YOU PAY: $6,412.50

AND GF10K precision balance AND GF10K precision balance

MSRP: $3,600.00

YOU PAY: $2,700.00

Precision Lab Balance AX5202 Precision Lab Balance AX5202

MSRP: $2,850.00

YOU PAY: $2,422.50

Cubis MSU10202S-000-D0 toploading balance Cubis MSU10202S-000-D0 toploading balance

MSRP: $7,395.00

YOU PAY: $6,655.50

Additional Info
Additional Info
Brand AND
Capacity x Readability 8100 g x 0.01 g
Readability 0.01 g
Weight Modes Carats, Grains, Milligrams, Pounds, Ounces, Pennyweight, Grams, Troy Ounces, KiloGrams
Functions Percent Weighing
Features Parts Counting, RS-232c, Washdown
Legal for Trade No Legal for Trade
Construction Solid Diecast Metal Base Housing, Stainless Steel Weighing Pan, VFD Display, Magnetic Force Motor Super Hybrid Sensor (SHS)
Calibration External - requires purchase of OPTIONAL 2 kg, 3 kg, 4 kg, 5 kg, 6 kg, 7 kg, or 8 kg calibration mass
Communication RS-232, Aftermarket DB9 RS-232 Adapter Converter with USB Cable can be purchased
Platform size (inches) 10.62 x 8.26
Power Requirements 120V AC Adapter included
Manufacturer Warranty (years) 5
Additional info Large 10.62 x 8.26 weigh pan, IP65 Washdown rating. Fast, new Super Hybrid Sensor (SHS) gives you the ultimate in response speed - Just ONE Second!

Use spaces to separate tags. Use single quotes (') for phrases.