Sartorius Explosion Proof FC2CCE-SX
Sartorius FC2CCESX offers 2.2 kg weighing capacity that increments in 0.01 gram interval and is one of the few explosion proof, intrinsically safe scales in the world.
Availability: 0 left in stock. Call for availability
YOU PAY: $5,239.25
Sartorius FC2CCE-SX intrinsically safe balance is equipped with built-in motorized calibration weights, so you can check the scale's accuracy by a simple pressing of the keypad. The power jack and data output port are both on the weighing platform. The RS232C interface ensures secure data transfer over optional zener barriers or interface converters to the non-hazardous area; e.g., to a Sartorius YDP20-OCE printer or computer.
Family Mutual Approved for use in Class 1, Division I, Groups A,B,C,D hazardous environments. Complete detailed description about all these classifications can be found here.
The power supply for all FC-EX Series IS NOT INCLUDED and you must purchase separately either YPS02-ZKR safe area power supply for $1625 or YPS02-XKR hazardous area power supply for $1900. The Sartorius YPS02-XKR hazardous area power supply requires hard wiring by licensed electrician and comes with 8ft of intrinsically safe cable by 8ft cable.
Sartorius FC2CCE-SX has a wide array of application programs: weighing in percent, statistics, totalizing, recalculation, differential weighing, calculation of weight values, check weighing, net–total formulation, and mass unit conversion. The explosion proof digital balance also offers several additional functions for combination: second tare memory, ID codes, product data memory and user-definable printout design.
If you're weighing hazardous liquids, solids or gases, the complete line of Sartorius explosion-proof scales can satisfy most of these stringent requirements. Because the scale is intrinsically safe there is no need for a bulky containment housing for most installations. All FC Series are ruggedly built with stainless steel platforms, strong cast aluminum housing and IP-54 rated against spills. Now you don't need to sacrifice accuracy for safety in hazardous environments.
Intrinsic safe balances protect so that the low energy of the intrinsically safe electrical circuits cannot cause ignition even when there are short circuits or sparks/arcs during fault conditions. For this reason, the cables of intrinsically safe equipment, for example, do not need to be installed in protective conduits.
The weigh indicator has a backlit graphical displays. For your ease of use, the operating menu lets you customize the display (digit size, optional information, display inversion, contrast, etc.) and activate a bar graph display as an aid in filling. The backlighting ensures good readability even under adverse conditions. Text supported operator guidance facilitates handling and configuration in every application.
Read more here about the Sartorius FC2CCE-SX and additional models ranging in capacity from 620g to 12,000g here
See the full line of Sartorius Explosion-proof scales HERE.
Sartorius typically has no inventory so it is probably best that you call us prior to placing an order so we can check if there is stock. Sartorius always seems to experience excessive lead times due to lack of parts. Sartorius typically gives lead times of two to three weeks, but it is not usually to take greater than 2 MONTHS. If you can work with these lead times place the order on line, but if you cannot work with these lead times it is best to call us and we can tell you what is in stock.
|Capacity x Readability (grams)||0 - 2200 g x 0.01 g|
|± 0.01 g|
|Linearity, grams||± 0.02 g|
|Response Time (average)||1.5 seconds|
|Tare Range||FULL to Capacity|
|Selectable Weight Units||g, kg, ct, lb, oz, ozt, tlh, tls, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat, MS and lb/oz|
|Selectable Application Programs||Mass unit conversion by toggling, counting, weighing in percent, animal weighing, calculations, density determination, over/under checkweighing, time-controlled function, totalizing, statistics, 2nd memory tare, identifiers, product data memories|
|Display Update||0.1 - 0.4 seconds depended upon filter level selected|
|Allowable Ambient Operating Temperature||0°
C to 40° C (32° F to 104° F)
85% RH or less
(10° - 30°C/50°F-86°F)
|± 20 ppm / °C|
|Internal Calibration||Yes - feature isoTEST - Fully automatic internal calibration. At a touch of one key, the scale will calibrate itself automatically, using a built-in-weight.|
|External Calibration||2000g Optional|
|Protection Rating||IP54 Protection Rating|
|Platform Size||8.5" x 7.9"|
|9.4" x 11.6" x 3.4"|
|Display Dim. (WxHxD)||9.4" x 4.1" x 1.6"|
|Overload Capacity||10 kg or 22 lb|
|FM Approval Rating||FM Approved for use in Class 1, Division I, Groups A,B,C,D hazardous environments|
|Built-in RS-232 Interface||Yes|
|Power Source||Power Supply IS NOT INCLUDED must purchase separately either YPS02-ZKR Safe area power supply or YPS02-XKR Hazardous area power suppl|
YOU PAY: $1,850.00
YOU PAY: $1,925.00
YOU PAY: $5,985.00
YOU PAY: $5,681.00
YOU PAY: $370.00
YOU PAY: $1,199.00
YOU PAY: $2,395.00
YOU PAY: $5,581.25
YOU PAY: $850.00
YOU PAY: $6,160.75
|Capacity x Readability||2200 g x 0.01 g|
|Weight Modes||Carats, Grains, Milligrams, Pounds, Ounces, Pennyweight, Grams, Troy Ounces, KiloGrams|
|Functions||Averaging, Formulation, Percent Weighing|
|Features||Parts Counting, RS-232c, Internal Calibration|
|Legal for Trade||No Legal for Trade|
|Construction||Solid Diecast Metal Base Housing, Stainless Steel Weighing Pan, Magnetic Force Motor Monolithic Weigh Cell|
|Calibration||Motorized automatic internal calibration|
|Platform size (inches)||8.5 x 7.9|
|Power Requirements||120V AC Adapter NOT included|
|Manufacturer Warranty (years)||3|
|Additional info||Power supply for all FC-EX Series IS NOT INCLUDED and you must purchase separately|