AND FX200iN NTEP Approved Legal For Trade Class 2 Scale
Availability: 0 left in stock. In Stock
YOU PAY: $791.25
MFR won't let us advertise below $791.25.
There is a lot of confusion when it comes to buying the FX-i NTEP digital balances and hopefully the video above will clear those issues up do you don't purchase the wrong balance.
In this video I will be using the FX-300iN and what I will be covering is applicable to all the FX-iN models which includes the FX120iN. FX200iN, FX300iN, FX1200iN, FX2000iN and FX3000iN. So if you listened carefully you heard all the model numbers ended with the letter "N" which designate NTEP Approved or Legal for Trade for the AND FX-i Series. Many people really don't see any difference between the FX-300iN and the FX-300i, but there is. If you require a legal for trade weighing device especially for commercial weighing and you ordered the non-NTEP version you will have problems. As you can guess the FX-iN NTEP Approved models costs more than the FX-i Non-NTEP models.
If you are a pharmacy needing to meet the requirements for maintaining your pharmacy license you want to order the FX-300iN and not the FX-300i. The same goes for a Oregon marijuana dispensary you need the FX-300iN, while Colorado marijuana dispensaries as of March 2016 are allowed to use the FX1200iN, FX2000iN or FX3000iN. Eventually we think Colorado recreational cannabis dispensaries will follow Oregon's rules requiring the FX300iN since this model has a verification scale division of "e"=0.01g and "d"=0.001g.
So here are the differences. You receive the manual with a 1 page addendum explaining how to calibrate the balance along with a "sealing plate" and two(2) "sealing screws" and labeling above the display.
You will notice the sealing screw has a hole and this allows the Weights and Measures Inspector to place a wire through the hole and then crimp the wires together with a lead slug similar to how an electric or water meter was sealed to prevent people from tampering. Placing the wire through these screws prevents you from accessing the calibration switch to initialize the start of a new calibration.
Every balance should be calibrated prior to weighing and you should check with Weights and Measures if you can perform the calibration by purchasing your own optional calibration weight, if you have to hire a local licensed scale technician to perform the calibration or if the Weights and Measures Inspector will calibrate the scale when they inspect it and put the scale into service. You'll need to research this on your own and in some states it can cost you over $150 just for the inspection. Typically they will also place a State W&M Seal on the balance with an expiration date since scales typically they have to be verified and inspected for accuracy yearly.
You will see on the front of the balance above the display a label denoting the model number. This is where so much confusion occurs. The model is shown as FX-300i, then a circle with II inside of the circle meaning this is a Class 2 weighing device, CC 08-045 and the wording "The counting feature is not legal for trade". But wait I thought I ordered the FX-300iN yet the balance is labeled FX-300i.
What has happened is AND Weighing converts the FX-300i into the FX-300iN by changing the balance's internal software so it complies with NTEP requirements. Part of this is so the calibration can be locked out also so the last decimal place on the display is "boxed". They also place the sticker above the display identifying the CofC number and supply the two sealing screws & sealing plate. All these changes and A&D markets the product as the FX-300iN and charges more money.
Many marijuana dispensaries either already have a FX-iN balance and want to expand and order another balance or they visited a dispensary so they can figure out the equipment they need to start a store. Although looking at the digital balance's label is marked either FX-300i for Oregon or for dispensaries in Colorado FX-1200i you need to make sure you order the FX-300iN or FX-1200iN.
|Capacity x Resolution (grams)||220 x 0.001 g|
|Capacity x Resolution (ounces)||7.76 x 0.00005 oz|
|Capacity x Resolution (pounds)||0.485 x 0.000005 lb|
|Capacity x Resolution (pound:ounce)||N/A with FX-iN models|
|Capacity x Resolution (troy ounces)||7.07 x 0.00005 ozt|
|Capacity x Resolution (carats)||1100 x 0.005 ct|
|Capacity x Resolution (pennyweight)||141.7 x 0.001 dwt|
|Capacity x Resolution (grains)||N/A with FX-iN models|
Min. Unit Mass
# of Samples
|5, 10, 25, 50 or 100 pieces|
Min. 100% Ref. Mass
Min. 100% Display
|0.01%, 0.1%, 1%
(depends on the
reference mass stored)
|Repeatability (Std. Deviation)||0.001 grams|
|Linearity||± 0.002 grams|
(typically set at FAST)
|Approximately 1 second|
(10°C to 30°C)
|± 2 ppm / °C|
|Sensing Method||Compact Super Hybrid Sensor (SHS)|
|Breeze Break||Small Breeze Break 3.4" high (Included)|
|Operating Temperature||5°C to 40°C (41°F
85% RH or less (No condensation)
|Legal For Trade||CofC # 08-045A2 (Canada AM-5692)|
|Display Type||Vacuum Fluorescent Display (VFD)|
|Display Refresh Rate||5 times / second,
10 times / second
or 20 times / second
|Std. Serial Interface||RS-232C Interface|
|Weighing Pan (diameter)||5.1" / 130 mm|
|AC Adaptor||120V AC Adapter Included. This balance runs on AC Adapter only, will not run on batteries.|
|Power Consumption||Approximately 11 VA
(supplied to the AC Adaptor)
| 7.6" x 10.3" x 3.3"
193 mm x 262.5 mm x 84.5 mm
YOU PAY: $757.50
YOU PAY: $1,428.00
YOU PAY: $1,558.85
YOU PAY: $372.00
YOU PAY: $2,104.60
YOU PAY: $1,186.00
YOU PAY: $1,639.65
YOU PAY: $791.25
YOU PAY: $875.00
YOU PAY: $769.28
YOU PAY: $813.75
YOU PAY: $1,070.00
YOU PAY: $912.93
YOU PAY: $355.00
YOU PAY: $1,294.55
YOU PAY: $1,333.82
YOU PAY: $1,462.00
YOU PAY: $1,893.80
YOU PAY: $810.00
YOU PAY: $1,066.00
YOU PAY: $1,402.50
YOU PAY: $761.25
YOU PAY: $975.00
YOU PAY: $696.24
|Capacity x Readability||220 g x 0.001 g|
|Weight Modes||Carats, Pounds, Ounces, Pennyweight, Grams, Troy Ounces|
|Features||Legal For Trade, Parts Counting, RS-232c|
|Legal for Trade||Yes Legal for Trade|
|Construction||Metal Housing, Stainless Steel Weighing Pan, VFD Display, Magnetic Force Motor Super Hybrid Sensor (SHS)|
|Calibration||External - requires purchase of OPTIONAL 50g or 100g calibration mass|
|Communication||RS-232, Optional USB module can be purchased, Optional Ethernet module can be purchased|
|Platform size (inches)||5.1 diameter|
|Power Requirements||120V AC Adapter included|
|Manufacturer Warranty (years)||5|
|Additional info||Small Breeze Break 3.4" high|