Sale

AND EK-6100J NTEP Digital Scale

6000 g x 0.1 g

EK6100J has a 6000 gram weighing capacity and increments in 0.1 gram graduations. Large stainless steel weighing platform and AC adapter is included. 6000d NTEP Approved.

Availability: 1 left in stock. Discontinued

MSRP: $675.00

YOU PAY: $499.97

You save $175.03

Useful Downloads
You Tube
Instruction Manual for AND EK-J Series Digital Scale
Download National Type Evaluation Program (NTEP) Certificate of Conformance 06-054
Details
Details
We made a special purchase on the EK6100J that has a maximum weighing capacity of 6000 grams and increments in 0.1 gram graduations with a 5.2 x 6.7 inch rectangular weighing platform. Some people might ask how do we sell so cheap. We buy in huge volume and as an Authorized A&D Weighing Distributor the manufacturer comes to us to move their excessive inventory. We price the scale at ridiculous low prices to move the scales since it is only a matter of time before our phone rings asking us to buy more overstock.

These are brand new units and a great alternative to the Mettler Toledo JL6001-GE, Ohaus Scout SP6001 or Scout SPX6201. We have priced the EK6100J so aggressively that it is cheaper to buy the EK6100J than the EK3000i, EK4100i, and EK6100i.

What is the difference between the EK-6100J verses the EK-6100i? Notice the last character in the model name is "J" verses "i"). The EK-6100i (non-NTEP) while the EK6100J is Legal For Trade. Legal-for-Trade balances typically cost a lot more than "Not Legal for Trade" since extensive testing is required to achieve a Certificate of Conformance 06-054.

To attain the covenant status of legal for trade the EK-6100j is tested with several increasing/decreasing load and shift tests and these test occur over a temperature range of 41°F to 95°F. A load of approximately one-half capacity is applied to the EJ6100J over 100,000 times and must weigh with the testing tolerances.

EK6100J NTEP approved Class II Legal For Trade scale's "d"(value of scale division) is 0.1 grams and the "e" (value of verification scale division) is 1 grams. The balance meets the requirements as a Class II weighing device defined in Handbook 44. All this information can be verified by downloading the CofC # 06-054 so you can printout this certificate to check with your Weights & Measurements Inspector if they will allow you to use the EK6100J for your particular weighing application.

Many people purchasing the EK-6100J might not need legal for trade status and want to remind people this is a great scale designed for manufacturing, industrial, laboratory,classroom applications. The fast display update rate is ideal for mixing of flavors and spices as well as chemical ingredients. Companies packaging products by weight can use the EK6100J for quality control and compliance to verify their package contains the correct weight denoted on the packaging.

The EK6100J digital scale can be used for material testing to adhere to state specific guidelines and ASTM specifications. Whether you are performing sieve analysis of fine and coarse aggregates to total moisture content of aggregate by drying.

There is also an optional underhook for specific gravity determination below balance weighing used for weighing concrete cores. Always refer to the particular AASHTO test method and verify your sample size will not exceed 6000 gram capacity and requires resolution to 0.1 grams then EJ6100J meets the requirements.

The EK6100j comes standard with RS-232C interface at no additional cost. Plus you can download a free copy of the A&D WinCt balance communication software if you plan on exporting weighing results to your computer. If your computer only has a USB port then be sure to purchase the optional USB to 9 pin RS-232 converter.

Need to print weighing results? Using the RS232 interface connected to the optional A&D AD-8121B impact dot matrix printer featuring full range of statistical functions, interval printing with built-in clock/timer function to meet most GLP/GMP requirements.

The compact size and small footprint saves valuable laboratory bench space and is something very few scale companies offer.

When the EK-6100J digital balance is first installed it should be calibrated to ensure accurate weighing results. We offer a full line of optional calibration weights including low cost 5kg Class 6 with no cert or Class 2 5000g calibration weight for the EK6100J. Every location in the world is positioned differently to "magnetic north" and therefore the acceleration of gravity is slightly different.

Additional applications for the EK6100J would be for weighing large quantities of gold and silver - 50 ounces and need an affordable priced legal for trade scale. If you watch the popular Discovery Channel "Gold Rush" in Season 6 you'll see Todd Hoffman, Parker Schnabel and Tony Beets team using an A&D EK Series digital scale to weigh their gold after many clean outs on the show.

Finally, the best selling point is AND Weighing fabulous product support. A&D Weighing has a dedicated product support line by calling 1-800-726-4940 6:00 am to 5:00 pm PST. Finally the A&D is simply to use and configure. The product manual is written for the average person to configure their scale verses having to spend $100's calling for scale company help you figure out how to use the weighing device.

Precision Weighing Balances has been an Authorized AND Weighing Distributor for over a decade. See the full line of A&D EK Scales here.

Specs

Gram

6000 x 0.1 g

Decimal Ounce

211.65 x 0.005 oz

Decimal Pound

13.230 x 0.0005 lb

Troy Ounce

192.90 x 0.005 ozt

Pennyweight

3858 x 0.1 dwt

Carat

n/a

Grain Unit

n/a

Counting Min unit weight

0.1 g

Max. Count

6,000 pcs

Counting:
# of samples

5. 10, 25, 50 or 100 piece

Percentage Min. Div

0.1%

Linearity

± 0.2 g

Repeat./Std. Div.

0.1 g

Legal for Trade

YES -  CofC 06-054
Only the EK-610J, EK-6100J, EW-1500i, EW-12Ki, EK-600i, EK1200i, EK6000i and the EK-12Ki are Legal For Trade.

Verification scale division (e)

gram (1g), ounce (0.05 OZ), ounce troy (0.05 ozt), pound (0.005 lb), pennyweight (1 dwt), carat (5 ct), and grain (20 GN)

Displayed scale division (d)

gram (0.1g), ounce (0.005 OZ), ounce troy (0.005 ozt), pound (0.0005 lb), pennyweight (0.1 dwt), carat (0.5 ct), and grain (2 GN)

Pan Size

133 x 170 mm / 5.2 x 6.7 inches

Tare Range To capacity by subtraction
Stabilization Time 2 Seconds (typically)
Sensitivity Drift ± 20 ppm / °C (10°C ~ 30°C / 50°F ~ 86°F)
Display 7 segment LCD display with backlit
(Character height 16 mm)
Display Refresh 10 times per second
Physical Dimensions 7.5 (W) x 8.6 (D) x 2.6 (H) inches
Operating Temperature -10° C ~ 40° C
14° F ~ 104° F RH less than 85%
Power

AC Adapter, 100, 120, 220, 240 VAC 50/60Hz
9 hours continuous operation (backlit off) with rechargeable battery pack (optional)

Standard Accessories Manual, AC Adapter, RS-232C interface
Optional Accessories Comparator/Relay Output, Rechargeable NiMH Battery pack, Calibration mass, Carrying Case, Printer

Weight (Approx.)

1.5 kg / 3.3 lb

Cal. Mass (optional)

6,000 g

What's included
AC adapter
Manual
You May Also Like
You may also be interested in the following product(s)
AND EK-610J Class II Legal for Trade Scale AND EK-610J Class II Legal for Trade Scale

MSRP: $620.00

YOU PAY: $325.77

Mettler Toledo JL6001GE NTEP Approved Scale Mettler Toledo JL6001GE NTEP Approved Scale

MSRP: $730.00

YOU PAY: $543.00

AND FX3000iN NTEP class 2 Legal For Trade digital scale AND FX3000iN NTEP class 2 Legal For Trade digital scale

MSRP: $1,080.00

YOU PAY: $810.00

AND EW12Ki Compact balance AND EW12Ki Compact balance

MSRP: $425.00

YOU PAY: $331.50

AND EK6000i NTEP Class 3 compact scale AND EK6000i NTEP Class 3 compact scale

MSRP: $565.00

YOU PAY: $409.23

Ohaus AX8201N/E Ohaus AX8201N/E

MSRP: $1,360.00

YOU PAY: $1,156.00

Sartorius Practum6101-1S scale Sartorius Practum6101-1S scale

MSRP: $1,315.00

YOU PAY: $899.89

AND EK600i NTEP Class 3 compact balance AND EK600i NTEP Class 3 compact balance

MSRP: $520.00

YOU PAY: $334.00

AND EK12Ki NTEP Class 2 balance AND EK12Ki NTEP Class 2 balance

MSRP: $730.00

YOU PAY: $503.70

Ohaus Adventurer Scale AX8201/E Ohaus Adventurer Scale AX8201/E

MSRP: $1,308.00

YOU PAY: $1,111.80

Sartorius ENTRIS 8201-1S digital scale Sartorius ENTRIS 8201-1S digital scale

MSRP: $1,295.00

YOU PAY: $761.16

Ohaus SPX Scout SPX6201 Scale Ohaus SPX Scout SPX6201 Scale

MSRP: $758.00

YOU PAY: $530.60

Sartorius Quintix6101-1S Lab Scale Sartorius Quintix6101-1S Lab Scale

MSRP: $2,025.00

YOU PAY: $1,489.95

AND FX2000iN NTEP approved Digital scale AND FX2000iN NTEP approved Digital scale

MSRP: $1,055.00

YOU PAY: $791.25

AND EJ6100 concrete density scale AND EJ6100 concrete density scale

MSRP: $490.00

YOU PAY: $328.79

AND EK4100i compact scale AND EK4100i compact scale

MSRP: $725.00

YOU PAY: $500.25

AND GF3000N NTEP approved Class 2 Precision balance AND GF3000N NTEP approved Class 2 Precision balance

MSRP: $1,675.00

YOU PAY: $1,290.00

AND EW1500i Triple Range compact balance AND EW1500i Triple Range compact balance

MSRP: $425.00

YOU PAY: $331.50

AND EK2000i digital scale AND EK2000i digital scale

MSRP: $565.00

YOU PAY: $389.85

Mettler JL602GE Class II Scale Mettler JL602GE Class II Scale

MSRP: $730.00

YOU PAY: $543.00

AND FX1200iN NTEP approved toploader balance AND FX1200iN NTEP approved toploader balance

MSRP: $1,015.00

YOU PAY: $761.25

Ohaus EX6201 Laboratory Toploader Digital Balance Ohaus EX6201 Laboratory Toploader Digital Balance

MSRP: $2,906.00

YOU PAY: $2,470.10

Additional Info
Additional Info
Brand AND
Capacity x Readability 6000 g x 0.1 g
Readability 0.1 g
Weight Modes Carats, Grains, Pounds, Ounces, Pennyweight, Grams, Troy Ounces
Functions Percent Weighing
Features Legal For Trade, Parts Counting
Legal for Trade Yes Legal for Trade
Construction ABS Plastic Housing, Stainless Steel Weighing Pan, Strain Gauge Weigh Sensor
Calibration User selectable external calibration requires purchase of OPTIONAL calibration weight. 5000 gram recommended
Communication no communication port
Platform size (inches) 5.2 x 6.7
Power Requirements 120V AC Adapter included, requires purchase of optional custom rechargeable battery
Manufacturer Warranty (years) 5
Additional info The serial connector is not functional so you can never connect to a computer or printer. The EK-J Series (EK610J and EK6100J) are the only models that do not have an active RS-232 interface.
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...