20 piece-25kg to 1g Calibration weight set-Class 1 nvlap cert

This weight set includes 20 pieces: 25 kg, 2-20 kg, 10 kg, 5 kg, 2-2 kg, 1 kg, 500 g, 2-200 g, 100 g, 50 g, 2-20 g, 10 g, 5 g, 2-2 g, 1 g. Any Troemner weight sets over 1kg in total weight come shipped in a 35lb wooden crate.

Availability: 0 left in stock. Usually ships in 3 weeks

MSRP: $14,925.00

YOU PAY: $13,039.00

You save $1,886.00

Useful Downloads
Calibration certificate comparison table
NVLAP calibration certificate SAMPLE
Troemner ASTM Class 1 weights 1 g and larger are produced from two pieces of material. The body of the weight is one piece and the knob of the weight is the second piece. The knob has a thread that screws into the body and is tightened. There is a cavity below the knob thread in the body which contains adjusting material, typically the same material from which the weight is made. -------------- Surface Finish All surfaces are polished to a perfect, mirrorlike finish and conform to specifications in ANSI/ASTM E617. For ANSI/ASTM E617 surface finish specifications see the Mass Standards Handbook. -------------- Suggested Applications Class 1 weights can be used to calibrate certain Class I and Class II balances and scales as specified in OIML R 76. Class 1 weights can also be used to calibrate Class 2 weights. -------------- Presentation • All Troemner weight sets are supplied in protective cases. • Troemner weight sets where the largest weight is 200 g and lower are supplied in attractive, durable polypropylene cases with a compartment for each weight within the case. There is also a compartment for forceps. The cases are designed so that each weight will stay in its compartment. • Troemner weight sets, where the largest weight is 500 g and larger are supplied in handcrafted wood cases. Within the interior of the wood case is contained a polypropylene case to hold weights 200 g and below with compartments for each weight. For weights larger than 200 g, a velvet lined compartment for each weight exists within the wood case. There are also compartments for lifters and forceps supplied with each weight set. • Troemner supplies appropriate lifting devices such as forceps, gloves, and other lifting forks sufficient to handle every weight in the set. • Troemner individual weights are not supplied in cases. However, protective cases in either wood or polypropylene are available for an extra charge. Wood cases for individual weights are available for weights 1 g and larger. These handcrafted cases feature a fine -------------- Certificate of Calibration - The Certificate of Calibration includes everything found in a Report of Traceability listed above with the additional information listed below: Uncertainty value Test conditions temperature, barometric pressure, humidity. Conventional Mass Correction Uncertainty of the measurement Identification of the balance used in the calibration as found value if an adjustment is performed assumed density of the weight material weight is made from Pass/Fail result of magnetic testing Volume of the weight Cubical Coefficient of expansion True Mass correction -------------- Difference between Traceability and Certificate of Calibration? The major difference between the Report of Traceability and the Calibration Certificate is the Report of Traceability is a tolerance test and is only available for new weights. The Certificate of Calibration is a full report of the parameters tested. Above we outline what comes with each report. The Certificate of Calibration will, however, give a smaller uncertainty and a more precise value of the actual mass due to the multiple measurements that are made during the calibrating process. If you require a accredited laboratory certificate to meet ISO/IEC 17025 & ANSI/NCSC Z540-1 the you need a NVLAP Certificate of Calibration. We also offer a huge selection of Laboratory Calibration Weights and Calibration Mass Sets with Calibration certification and NIST Traceable Calibration for lab balances at All calibration weights are not returnable.  Once your order has been placed it CAN NOT be cancelled. Please carefully consider this prior to placing your order. The reason for this is these weights are custom manufactured.

Description: Alloy 8 Metric Precision Weight Sets
Weight Set
25 kg, 2-20 kg, 10 kg, 5 kg, 2-2 kg, 1 kg, 500 g, 2-200 g, 100 g, 50 g, 2-20 g, 10 g, 5 g, 2-2 g, 1 g
Class: Class 1
Certification: NVLAP Certificate
Material: Highly polished weights. 25kg-2kg weights are 316 stainless steel, 1kg-1g weights are Alloy 8 stainless steel
Construction: 2 piece construction with handling knob
Case: Supplied in handcrafted wood case. Includes a compartment for a polycarbonate case which holds weights 500 g and below. 1 kg and 2 kg weights are held in individual polycarbonate cases inside a felt-lined cutout. For weights 5 kg and larger, a felt-lined
What's included
Felt lined wood case with compartments for each weight
NVLAP certificate
You May Also Like
You may also be interested in the following product(s)
21 Piece Class 1 Traceable Weight Set 21 Piece Class 1 Traceable Weight Set

MSRP: $1,628.00

YOU PAY: $1,400.00

9 Piece Calibration Weights Set 9 Piece Calibration Weights Set

MSRP: $877.00

YOU PAY: $754.00

Additional Info
Additional Info
Brand Troemner
Legal for Trade N/A
Construction Alloy 8 Stainless Steel

Use spaces to separate tags. Use single quotes (') for phrases.