Ohaus PA64 Analytical Scale
Ohaus PA64 analytical scale has 65 gram capacity with 0.1 mg readability. Ohaus pioneer PA64 features parts counting, percent weighing, and a draft shield.
Availability: 3 left in stock. Discontinued
YOU PAY: $1,338.75
Ohaus Pioneer™ analytical balance was designed for basic routine weighing in a variety of laboratory, industrial and education applications. The Ohaus PA64 has the right combination of performance and features, the Ohaus Pioneer offers uncomplicated performance for all your basic weighing needs.
Ohaus Pioneer Scales from Ohaus Corporation offers an affordable solution for basic accurate laboratory weighing. For those of you that cannot afford to pay for features such as internal calibration, the PA64 analytical scale may be a great alternative. Ohaus Pioneer PA64 features parts counting, percent weighing, and a draft shield without costing tons of money.
You can choose an analytical scale in the Ohaus Pioneer Series ranging from 65 to 210 grams maximum weighing capacity. Select an Ohaus lab balance according to your laboratory's specific weighing requirements.
To address the ease of cleaning requirement often expressed by routine users, Pioneer's draftshield has been designed with easy to remove doors and panels. Disassembly takes just seconds and all components including the balance housing can be quickly wiped clean.
Periodic cleaning made easy helps avoid sample contamination and extends product life. In addition, a standard in-use cover provides added protection against accidental spillage and helps minimize the chance of damage to the display and keypad.
Should breakage occur, each replacement door or panel can be installed in seconds. A standard in-use cover provides added protection against accidental spillage.
Pioneer has been designed with an up-front level indicator, so that users can quickly ensure the balance is level prior to use. Selectable environmental settings include three filter modes and adjustable zero tracking adjust balance sensitivity to environmental disturbances, or application requirements. The large draftshield features sliding top and side doors.
When the Ohaus PA64 balance is first installed, or is moved to another location, the lab balance must be calibrated to ensure accurate weighing results. The Ohaus PA64 requires the purchase of a optional external 50 gram calibration weight to perform calibration> We always recommend that you purchase the calibration weight when you purchase the balance. You can learn more about calibration weights and the tolerances at calibrationweight.com
Before you make your final selection be sure to see the Scientech ZSA Series featuring 80 to 210 gram with 0.1mg resolutions. When US government customers call us saying the must comply with the Buy American Act clause the only similar balance we offer to the PA64 that is made in America would be the Scientech ZSA80. FAR Part 25.003 requirements state that domestic end products are preferred over foreign end products, and the Ohaus Pioneer is not made in the USA.
Before purchasing any analytical balance, be sure you review the new AND HR-100A designed with a removable, shatterproof breeze break with antistatic coating perfect for challenging weighing applications where contamination is a potential concern. Plus the small 8 x 12 inch footprint design saves you space. Finally, the AND HR-100A offers a 5 year warranty while the Ohaus PA64 is only 2 years.
Be sure you review the Sartorius Secura. Secura offers a simple touch screen technology with easy to read and understand I-cons. The Sartorius Secura124-1S allows you to enable SQmin and additional safety weighing features like the ability to program the minimum weight value so when you attempt to weigh samples below a set threshold the weight reading is displayed on screen in red. Built-in level verification, Password Protection, and memory tracking is also available. Secura is one of the worlds most technologically advance weighing instrument we offer.
We understand purchasing an analytical balance is a major capital expense and if you have any questions give us a call and one of our weighing experts can discuss your weighing application and get you the most affordable balance for your weighing needs.
Below are some videos of a new analytical balance Sartorius just introduced to the market that offers extreme value.
Sartorius Entris analytical balances display increments in 0.002 grains divisions. Long-range competitive shooters (600+ yards) always shoot for an edge over their rivals and one way is to shoot very uniform ammo. Weighing charges, bullets and primers to 0.002gn can make shot velocities more uniform within a shot string. Forget those inconsistent low cost strain gauge scales that weigh the same charge differently each time. If you want to win the competition you need every round to the exact kernel.
In the video above we will walk you through the steps to change the default factory setting of grams to grains. once you make these changes your balance will power up each time in the grains mode. In this demonstration we use the Entris224-1S, but the steps are the same for all Sartorius Entris models.
In the video above we demonstrate the Sartorius Entris224-1S analytical balance and how easy calibration is when you purchase the optional calibration mass. The Sartorius Entris 4 decimal place balances offer a large draftshield with 3 sliding doors. See the quick settling time as we place calibration weights on the weighing platform. Get a better understanding of what each keypad does and how you can enter into the balance configuration menu to change the factory default setting to better meet your specific weighing requirements. The Sartorius Entris is easy to configure to optimize for your individual weighing application.
|Capacity (grams)||65 g|
|Readability (milligrams)||0.1 mg|
|Repeatability (milligrams)||± 0.1 mg|
|Linearity (milligrams)||± 0.2 mg|
|Weighing Units||mg, g, ct, oz, dwt, tical, tola, mommes, baht, grain, mesghal, Newton, ozt, teals|
|Application Modes||Weighing, Parts Counting, Percent|
|Tare Range||Full Capacity by Subtraction|
|Stabilization Time||3 seconds|
|Operating Temp Range||14°F to 104°F (-10°C to 40°C) at 10% to 80% relative humidity, non-condensing, up to 4000m above sea level|
|Calibration||Digital with External Weight|
|Power Requirements||AC Adapter (included)|
|Display Type||1-Line Alphanumeric LCD Display|
|Display Size (in/cm)||4" x 1" / 10 cm x 2.5 cm|
|Pan Size (Diameter)||Ø 3.54 inches|
|Height above pan (in/cm)||7.3 inches|
|Dimension WxHxD||7.7" x 11.3" x 12.6"|
|Gross Weight (lb)||10 lb|
|Shipping Weight||15.2 lb|
YOU PAY: $1,899.00
YOU PAY: $5,809.50
YOU PAY: $1,616.00
YOU PAY: $2,857.70
YOU PAY: $1,462.40
YOU PAY: $1,582.00
YOU PAY: $1,763.75
YOU PAY: $2,806.96
YOU PAY: $1,606.50
YOU PAY: $1,652.40
YOU PAY: $2,199.00
YOU PAY: $2,257.70
YOU PAY: $3,415.30
YOU PAY: $1,654.40
YOU PAY: $1,235.20
YOU PAY: $2,261.25
YOU PAY: $2,527.05
YOU PAY: $1,638.93
YOU PAY: $1,785.00
YOU PAY: $1,469.65
YOU PAY: $2,501.21
YOU PAY: $6,367.50
YOU PAY: $1,410.33
YOU PAY: $68.00
YOU PAY: $1,695.00
YOU PAY: $4,815.00
YOU PAY: $2,832.00
YOU PAY: $2,075.00
|Capacity x Readability||65 g x 0.0001 g|
|Weight Modes||Carats, Grains, Milligrams, Ounces, Pennyweight, Grams, Troy Ounces, Newtons|
|Features||Parts Counting, RS-232c|
|Legal for Trade||No Legal for Trade|
|Construction||ABS Plastic Housing, Stainless Steel Weighing Pan, LCD Display, Magnetic Force Restoration Weigh Sensor|
|Calibration||External - requires purchase of OPTIONAL 50g calibration mass|
|Platform size (inches)||3.54 diameter|
|Power Requirements||120V AC Adapter included|
|Manufacturer Warranty (years)||2|
|Additional info||All panels are easy to remove and replace, and together with a stainless steel bottom, make it fast and easy to clean|