Ohaus Scout Auxiliary Display Kit
Scout Auxiliary Display TAD7-S (Ohaus part 30333960) and the Ohaus RS232 Interface module (30268982) This kit will work with Ohaus Scout STX, SPX, SKX and SJX portable digital scales. The remote display allows 2 people to have their our display.
Availability: 0 left in stock. Call for availability
YOU PAY: $270.00
Ohaus discontinued the 30269019 Auxiliary Display Kit. So we just created a package the includes the Scout Auxiliary Display TAD7-S (Ohaus part 30333960) and the Ohaus RS232 Interface module (30268982) This kit will work with Ohaus Scout STX, SPX, SKX and SJX portable digital scales only.
We this this since if you just sold the Auxiliary Display TAD7-S Auxiliary Display (similar to the PAD7 display) people would think this is all that is needed to have the scale work with the remote display when it is NOT. The auxiliary display has to be connected to the RS232 Interface. So the setup will look something similar to the image below.
The RS-232 Interface module is installed on the mini DIN port (round connector) located at the rear side of the digital balance. Before connecting the Ohaus 30268982 RS232 module make sure the Ohaus Scout scale is powered off.
AUXILIARY DISPLAY MOUNTING & PLACEMENT OPTIONS
- Table top placement
- The Auxiliary Display may be placed on a flat surface without additional hardware
- Direct wall mounting: The Auxiliary Display may be mounted to a wall using two screws (not included). Select appropriate sized screws that fit into the holes in the back of the Display.
- Bracket wall mounting/table mounting: Attach the two mounting brackets. Position the Auxiliary Display where desired on the wall or table.
The Ohaus part number 30268983 works with the following models: SPX123, SPX223, SPX222, SPX422, SPX622, SPX1202, SPX2202, SPX421, SPX621, SPX2201, SPX6201, SPX8200, STX123, STX223, STX222, STX422, STX622, STX1202, STX2202, STX421, STX621, STX2201, STX6201, STX8200, SJX323N/E, SJX622N/E, SJX1502N/E, SJX6201N/E
This auxiliary display kit is an affordable solution for those states specified by Weights & Measures Inspectors to have a secondary display so the customer can see in real time. Typical this is referred to as "Direct Sales" - both buyer & seller are present and the scale needs to be positioned in such a way that the scale is in full view and the scale display can easily be read by both parties. Always check with your local Weights & Measures Inspectors for exactly all the requirements you must meet since some inspectors follow the rule exactly while other inspectors are very lenient.
Ohaus RS232 Interface module (Ohaus part 30268982)
YOU PAY: $530.60
YOU PAY: $151.00
YOU PAY: $425.60
YOU PAY: $254.80
YOU PAY: $584.50
YOU PAY: $211.00
YOU PAY: $437.50
YOU PAY: $164.00
YOU PAY: $266.70
YOU PAY: $105.00
YOU PAY: $476.70
YOU PAY: $321.30
YOU PAY: $657.30
YOU PAY: $172.20
YOU PAY: $511.70
YOU PAY: $20.00
YOU PAY: $312.20
YOU PAY: $252.00
|Manufacturer Warranty (years)||1|