Ohaus Scout SPX RS232 Interface

Ohaus 30268982 RS232 Interface module is for use with Ohaus Scout STX, SPX, SKX and SJX portable digital scales only.

This part is for only the 30268982 RS232 Interface module and does not include the scale nor any data acquisition software.

The RS-232 Interface module is installed on the mini DIN port (round connector) located at the rear side of the digital balance. Before connecting the Ohaus 30268982 RS232 module make sure the Ohaus Scout scale is powered off.

The OHAUS RS-232 Interface is preset to communicate using the following settings: 9600 baud, 8 bit, no parity, no handshake. Determine the RS232 parameters required for the printer or computer that is to be connected. See computer or printer documentation if assistance is required. If the parameters do not match, it will be necessary to change either the balance settings, or the computer / printer settings.

Upon installation of the interface, the balance will recognize the RS232 Interface and add relevant items to the menu. Configure the balance to the desired RS232 and printing parameters; refer to the balance Instruction Manual for assistance in using the menus.

The RS232 Interface Kit cable terminates with a 9 pin Sub-D female connector. Active pins: Pin 2 = TXD, Pin 3 = RXD, Pin 5 = Ground. The Interface connector can connect directly to a computer, an OHAUS printer.

For more information on the RS232 output and interface commands please download the user manual.

The Ohaus part number 30268982 works with the following models: SPX123, SPX223, SPX222, SPX422, SPX622, SPX1202, SPX2202, SPX421, SPX621, SPX2201, SPX6201, SPX8200, STX123, STX223, STX222, STX422, STX622, STX1202, STX2202, STX421, STX621, STX2201, STX6201, STX8200, SJX323N/E, SJX622N/E, SJX1502N/E, SJX6201N/E