AND GX32K industrial balance
Availability: 0 left in stock. In Stock
YOU PAY: $2,418.00
Smart Range was designed for users on a budget that require high resolution over a limited range. SmartRange allows the operator to select a movable fine range throughout the entire weighing range of the balance. The dual range balances offers you two balances in one. The range is switched automatically depending on the value displayed. Pressing the "RE-ZERO" key allows weighing in the precision range, regardless of the tare value.
Sounds all confusing but it isn't. You'll have 32,000 grams weighing gram with 1 grams readability and with a simple press of the "RE-ZERO" key you'll have ten times more resolution (0.1g) anywhere within the high range domain. This finer resolution will provide you with 0.1 gram intervals for a weighing spanned up to 6100 grams.
Fast, Super Hybrid Sensor (SHS) gives you the ultimate in response speed - Just 1.5 Seconds! SHS combines the best of magnetic force restoration and single point parallelogram load cell technologies. If the time ever comes where the SHS needs repair, you just replace one of three parts - there is no need to replace the whole weigh sensor as is the case with higher priced, slower competitive models. This new, innovative sensor is a core technology certain to dominate in the 21st century. Made in Japan by A&D Weighing, a global manufacturer of high precision instrumentation, with facilities in Milpitas, California and Norcross, Georgia to back and support the 60 month manufacturer warranty.
Standard built-in RS-232 interface allows you to easily connect the balance to a PC with included WinCT software included with all A&D laboratory balances. You can import the data into your PC software, such as Windows based Word/Excel software. This balance data communication software is included as standard equipment unlike other manufacturers.
Need to use the balance in a area without a computer?? No problem A&D the standard RS-232 interface can be tied into the optional 8121B data printer to meet your GLP/GMP requirements.
Additional features include internal calibration at a touch of the button on the GX-K Series. Animal weighing for maximum accuracy, the entire GX-K / GF-K Series can be programmed to average readings over a set period of time -- ideal for weighing lab animals or for work in unstable environments.
Multiple weighing modes available by simply pressing the "Mode" key and scroll through the desired weigh unit whether it is grams, ounce, pounds & more. The GX32K is the only balance in the GX-K Series that does not weigh in grains.
Precision Weighing Balances is an authorized A&D Dealer so you can buy in confidence that all units are brand new and come with the full 5 year manufacturer limited warranty. We always recommend you purchase from an authorized dealer since otherwise you risk buying a "gray market" unit imported from a foreign country and may not have any warranty at all.
We have a lot more information about this balance and additional models in the GX-K Series that may better fit your weighing needs. See additional images of the GX industrial balances by clicking here to learn all the features about this spectacular balance.
Free shipping UPS Ground in the lower 48 states for all A&D GX-K Series Precision Industrial Balances.
|Weighing capacity||6.1 kg / 31 kg|
|Resolution||0.1g / 1g|
|0.1g / 0.5g|
- 6100.0 x 0.1
6100.1 - 30000 x 1
|Decimal ounces (oz)||215.170
1093.50 x 0.05
|Troy ounce (ozt)||196.120
996.65 x 0.05
19933 x 1
155000 x 5
|Grains (GN)||Grain mode NOT available|
68.345 x 0.005
|Linearity||± 0.2g / ± 1g|
|Stabilization Time||1.5 seconds (Typical in FAST mode)|
|Sensitivity Drift (10° C-30° C/50° F-86° F)||± 5 ppm / °C|
|Accuracy right after calibration using internal mass||± 3 g|
|Weighing data of data memory||200 data, 100 data with calendar|
C to 40 ° C (41° F to 104° F),
85% RH or less
|Sensing Method||Super Hybrid Sensor (SHS)|
|Display Type||Vacuum Fluorescent Display (VFD)|
|Display Refresh rates||5 times/second or 10 times/second|
|Weighing units and modes||g, kg, lb, lb:oz, ct, dwt, ozt, mm, TL, Ms, t, and percent % and counting PCS|
|Counting Mode||Minimum unit mass||1 g|
|Number of samples||10, 25, 50 or 100 pieces|
|Percent Mode||Mini. 100% reference mass||100 g|
|Min. 100% display||0.01%, 0.1%, 1% Depends on the reference mass stored|
|Standard interface||RS-232C Serial interface with Windows Communication Tools (WinCT)|
|20kg, 30 kg|
|Water & Dust proof level||Compliance with IP-65 covers the entire device|
|Weighing Pan||Stainless steel weighing pan 270mm x 210mm / 10.6 inches x 8.27 inches (Wash down type)|
|Calibration||Motor-driven internal calibration with SHS (internal mass approx. 860g)|
x 355(D) x 111(H) mm
11.81" x 13.98" x 4.37"
|AC adapter||120V AC adapter|
|Power Consumption||Approx. 11VA (supplied by AC adapter)|
YOU PAY: $3,725.00
YOU PAY: $1,485.00
YOU PAY: $4,120.00
YOU PAY: $2,218.00
YOU PAY: $4,281.00
YOU PAY: $3,115.00
YOU PAY: $13,039.00
YOU PAY: $3,196.00
YOU PAY: $1,074.00
YOU PAY: $2,399.00
YOU PAY: $4,381.00
YOU PAY: $2,680.00
YOU PAY: $2,926.00
YOU PAY: $3,715.00
YOU PAY: $156.00
YOU PAY: $3,527.00
|Capacity x Readability||6100 g x 0.1 g|
|Capacity x Readability (dual range)||6100-31000 g x 1 g|
|Readability 2||1 g|
|Weight Modes||Carats, Milligrams, Pounds, Ounces, Pennyweight, Grams, Troy Ounces, KiloGrams|
|Features||Parts Counting, RS-232c, Internal Calibration, Washdown|
|Legal for Trade||No Legal for Trade|
|Construction||Solid Diecast Metal Base Housing, Stainless Steel Weighing Pan, VFD Display, Magnetic Force Motor Super Hybrid Sensor (SHS)|
|Calibration||Motorized automatic internal calibration|
|Communication||RS-232, Aftermarket DB9 RS-232 Adapter Converter with USB Cable can be purchased|
|Platform size (inches)||10.62 x 8.26|
|Power Requirements||120V AC Adapter included|
|Manufacturer Warranty (years)||5|
|Additional info||Large 10.62 x 8.26 weigh pan, IP65 Washdown rating. Fast, new Super Hybrid Sensor (SHS) gives you the ultimate in response speed - Just ONE Second!|