Sale

Sartorius ED153-N NTEP prescription pill counting scale

150 g x 0.001 g

Sartorius ED153-N digital scale is legal for trade, CofC 09-093A1, offers 150 grams weighing capacity with readability to 0.001 grams. The primary weigh mode must be grams or kilogram.The secondary weigh mode can set to either g, kg, ct, lb, oz or ozt.

Availability: 0 left in stock. Discontinued

MSRP: $1,585.00

YOU PAY: $1,268.00

You save $317.00

Downloads
You Tube
User Manual
Download Brochure
RS-232 Interface specs
Legal for trade certificate
Details
Details
Sartorius Extend ED153-N has been discontinued and no longer in production as of May 2013. We have no remaining stock on the ED153.

The Sartorius Extend ED line was phased-out and the replacement is February 2014 Sartorius brought to the marketplace the Sartorius ENTRIS153-1S but it is NOT Legal for Trade. If you require a NTEP electronic balance please review the Mettler Toledo JS703C/A, AND FX120iN NTEP Class 2 Approved, AND FX200iN Legal For Trade Scale or AND FX300iN NTEP Scale. Again we have no remaining stock on the ED153-N and all information displayed herein is for archival and support purposes only.

Sartorius Extend ED153-N is a legal for trade, class 2 digital scale. Sartorius ED153-N complies with Grain Inspection Packers and Stockyards Administration (GIPSA) requirements for grain test scales.

NTEP approved jewelry carat scale is affordably priced offering precise readabilities for legal for trade weighing applications. This jewelry scale from Sartorius also features an RS232 interface as well as counting and percent weighing functions. The RS232 interface allows you to connect the scale to Sartorius's optional auxiliary display so the customer can see the weight while you are standing on the opposite side of the jewelry case. You also can use the RS-232 interface to connect the scale to a Sartorius YDP20-OCE printer or computer for data acquisition.

For use as a Class II balance in general purpose weighing, direct sale of precious metals and/or gems (e.g. Jewelry Scale), GIPSA grain test scale and prescription counting.

To meet the sealing requirement of NTEP a pressure sensitive, tamper evident seal is placed over the covered hole on the rear of the balance. This restricts access to calibration and configuration parameters. A second pressure sensitive, tamper evident seal is placed over the seam where the case separates on the rear of the balance.

Legal for Trade is required in most states in the USA whenever commerce is occurring and money is being exchanged for a product by weight. You can read and learn more about what Legal for Trade means HERE.

The prescription counting program enables you to determine the number of parts that each have approximately equal weight. To do this, a known number of parts (the reference sample quantity) is weighed first, and the individual piece weight (reference weight) is calculated from this result. Thus, the number of parts subsequently placed on the balance can be determined

The counting feature will only accept a minimum reference count of 10. The minimum weight to establish a sample is 30e. Since the ED153-N "e" is 0.001g the minimum sample weight is 0.03g (0.001g x 30 = 0.03g)

When you select the Sartorius Extend Series you get lightening fast weighing results, high-contrast backlit LCD, plus an intuitive menu navigation that makes the operators manual practical obsolete. You can also purchase these extend balances with factory installed built-in motorized calibration. Combining affordability with a versatile design the Sartorius Extend is the new standard for precision weighing.

Sartorius typically has no inventory so it is probably best that you call us prior to placing an order so we can check if there is stock. Sartorius business model is "build to order" with a typical lead time 7-10 days. If you can work with these lead times place the order online, but if you cannot work with these lead times it is best to call us and we can tell you what is in stock. If you need a digital scale that is in stock look at the A&D FX200iN NTEP Approved Legal For Trade or AND FX300iN NTEP approved class 2 scale.

All promotional give away items by Sartorius USA for the purchase of a Sartorius Extend balances have been terminated. You can review HERE the promotional items Sartorius is offering in 2012 when you purchase a Sartorius Cubis or Sartorius CPA. In the past Sartorius offered a free accessory when you bought a Sartorius ED153-N but Sartorius USA has eliminated this offer and also raised their prices on ED153-N in 2012.

Precision Weighing Balances created our own customer appreciation promotional offer enabling our customers the ability to buy the YDP20-0CE Data Printer at a special price when you purchase the ED153-N. The MSRP is $1095 for the printer, but when you purchase it with the ED153-N we'll sell you the printer for $499.00.


Precision Weighing Balances is your authorized Sartorius Dealer. We offer the full line of Sartorius Extend Legal for Trade balances that includes 9 different models and you can see the full offering HERE

Looking for a more accurate legal for trade carat scale for your jewelry store??  Consider the Sartorius GD503 LFT carat scale.



In the video above we offer an overview of the components of the Entris milligram balance and how to assemble. Calibration is simple using an optional external calibration mass. We demonstrate the fast response time, repeatable weighing results and features like the leveling bubble, adjustable feet, RS-232 interface and more.



In the video above we walk you through the menu configuration settings & how to enable or disable weighing applications. The factory default is "weigh" and the weight unit is set to grams only. Easily change this to "Unit" allowing you to toggle an additional 4 weighing units, "Count" for parts counting plus the ability to configure a desired reference sample quantity from 1 to 10, "Percent" for percent weighing proportional to a reference weight commonly used in formulation especially ink mixing, "Animal Weighing" for weighing live insects or small critters, or "Density" for density determination and specific gravity.

See how to configure the Sartorius Entris precision balance changing the factory default setting for the primary weigh unit of grams to pounds. We'll walk you through the steps so you can configure your Entris balance to toggle up to 4 additional different weight units



In the video above we offer a general overview of the Sartorius Entris precision lab balance. We highlight the features, functions and operation of the Sartorius Entris precision balance. See some of the available accessories for the Sartorius Entris like the optional data printer, RS232 cable, calibration weights and weighing below hook.



In the video above we show you the excellent eccentric loading characteristics of the Sartorius Entris Balances. See as a calibration weight is placed in the center of 4 quadrants on the platform how the Sartorius Entris measures the weight accurately. Not all digital balances weigh accurately and if you own a laboratory balance other than Sartorius we doubt it compares to the Sartorius Entris. If you own an older Sartorius balance or someone tries to give you a deal on a used or discontinued Sartorius balance just forget it and buy the Entris.

To test eccentric loading we place a weight on the center of the weighing platform and record the weight. Now place the same item in 45-degree directions (front left, front right, rear right, and rear left) and compared to the measurement at the center. Compare the weighing results and if you have eccentric errors it just might be time to retire that balance and purchase a new Sartorius Entris.

Specs
Capacity x Readability
grams
150 g x 0.001 g "d"
150 g x 0.01 g "e"
Capacity x Readability
kilograms
0.150 kg x 0.000001 kg "d"
0.150 kg x 0.00001 kg "e"
Capacity x Readability
carats
750 ct x 0.05 ct "d"
750 ct x 0.5 ct "e"
Capacity x Readability
pounds
0.33068 lb x 0.00002 lb "d"
0.33068 lb x 0.0002 lb"e"
Capacity x Readability
ounces
5.2910 oz x 0.0005 oz "d"
5.2910 oz x 0.005 oz "e"
Capacity x Readability
troy ounces
4.8225 ozt x 0.0005 ozt "d"
4.8225 ozt x 0.005 ozt"e"
Legal for Trade
(NTEP approved)
YES - CofC 09-093A1 Legal for Trade
primary weigh mode must be g or kg ONLY
secondary weigh mode can be in g, kg, ct, lb, oz, ozt.
Prescription Counting Minimum individual piece weight must be greater than or equal to 0.03 grams. Reference sample size 10 to 100 pieces
Repeatability (std deviation)  ± 0.001 g
Linearity  ± 0.002 g
Response Time (average) 1.3 seconds
Tare Range FULL to Capacity
Selectable Weight Units g, kg, ct, lb, oz, ozt
Selectable Application Programs Toggle between 5 weight units, prescription counting, percent weighing, calculation, animal weigh averaging, net-total formulation, totalizing, density determination, dynamic weighing/averaging
Display Update 0.05 – 0.4 seconds
Display LCD with backlit
Operating Temperature Range 50° F to 86° F (+10° C to +30° C)
Allowable Ambient Operating Temperature 41° F to 104° F (+5° C to +40° C)
Sensitivity Drift ±3.3 ppm / °C
Motorized Internal Calibration OPTIONAL
External Calibration 100 g Optional
Pan Size ø4.5 in / ø115 mm
Dimensions (entire balance)
W x D x H
9" x 11.9" x 5.35" inches
230 x 303 x 136 mm
Built-in RS-232 Interface YES
Weighing Below A port for a hanger for weighing below the balance is available.  You can attach a sample using a suspension wire, for example.  Common applications for weighing below the balance includes density determination.
Power Source 120 VAC AC adapter
Power Consumption maximum 16; typical 8
Approx. hours of operation with YRB05Z rechargeable battery pack (backlighting on) 35 hours (requires purchase of optional YRB05Z rechargeable battery pack)
Standard Equipment AC Adapter, Round glass draft shield with cover
Optional Accessories RS-232 cable, USB interface kit, external calibration weights, weigh below hook, printer, external rechargeable battery pack, SartoConnect, Density determination kit, 13" x 15" Granite isolator slab, Standard Operating Procedure
Warranty 24 months
Net Weight, Approx. 2.6 kg / 5.73 lbs.
What's included
AC Adapter
User Manual
You May Also Like
You may also be interested in the following product(s)
Sartorius Secura213-1S milligram balance Sartorius Secura213-1S milligram balance

MSRP: $2,335.00

YOU PAY: $1,558.85

Scientech ZSP400NJ jewelry scale Scientech ZSP400NJ jewelry scale

MSRP: $1,895.00

YOU PAY: $1,544.00

Mettler Toledo JS703C/A digital carat balance Mettler Toledo JS703C/A digital carat balance

MSRP: $2,395.00

YOU PAY: $1,840.00

Sartorius Cubis MSU323S-100-DE milligram balance Sartorius Cubis MSU323S-100-DE milligram balance

MSRP: $5,530.00

YOU PAY: $4,977.00

OHAUS Adventurer AX223N/E LFT Class II OHAUS Adventurer AX223N/E LFT Class II

MSRP: $1,650.00

YOU PAY: $1,402.50

AND FX300iN NTEP approved class II scale AND FX300iN NTEP approved class II scale

MSRP: $1,085.00

YOU PAY: $813.75

Sartorius Practum213-1S milligram balance Sartorius Practum213-1S milligram balance

MSRP: $1,360.00

YOU PAY: $912.93

AND FX120iN NTEP Class 2 approved scale AND FX120iN NTEP Class 2 approved scale

MSRP: $1,010.00

YOU PAY: $757.50

Sartorius Quintix213-1S laboratory scale Sartorius Quintix213-1S laboratory scale

MSRP: $2,000.00

YOU PAY: $1,333.82

Scientech ZSP400NP pharmacy balance Scientech ZSP400NP pharmacy balance

MSRP: $1,895.00

YOU PAY: $1,544.00

ZSE250 jewelry scale ZSE250 jewelry scale

MSRP: $1,895.00

YOU PAY: $1,492.00

Sartorius ENTRIS 153i-1S with Internal Calibration Sartorius ENTRIS 153i-1S with Internal Calibration

MSRP: $1,680.00

YOU PAY: $1,063.94

AND FX1200iN NTEP approved toploader balance AND FX1200iN NTEP approved toploader balance

MSRP: $1,150.00

YOU PAY: $805.00

Sartorius ENTRIS 153-1S milligram balance Sartorius ENTRIS 153-1S milligram balance

MSRP: $1,060.00

YOU PAY: $696.24

AND FX200iN NTEP Approved Legal For Trade Class 2 Scale AND FX200iN NTEP Approved Legal For Trade Class 2 Scale

MSRP: $1,055.00

YOU PAY: $791.25

AND GF200 Milligram balances AND GF200 Milligram balances

MSRP: $1,385.00

YOU PAY: $1,070.00

AND GX200 Toploader Balance AND GX200 Toploader Balance

MSRP: $1,950.00

YOU PAY: $1,502.00

Adam Equipment PGL303 Milligram Balance Adam Equipment PGL303 Milligram Balance

MSRP: $825.00

YOU PAY: $684.75

AND FX120i Ammo reloader scale AND FX120i Ammo reloader scale

MSRP: $965.00

YOU PAY: $659.99

Class A Prescription Compounding GF300P Scale Class A Prescription Compounding GF300P Scale

MSRP: $1,650.00

YOU PAY: $1,237.50

Additional Info
Additional Info
Brand Sartorius
Capacity x Readability 150 g x 0.001 g
Readability 0.001 g
Weight Modes Carats, Pounds, Ounces, Grams, Troy Ounces, KiloGrams
Functions Toggle between 5 weight units, prescription counting, percent weighing, calculation, animal weigh averaging, net-total formulation, totalizing, density determination
Features Legal For Trade, Parts Counting, RS-232c
Legal for Trade Yes Legal for Trade
Construction ABS Plastic Housing, Stainless Steel Weighing Pan, Strain Gauge Weigh Sensor
Calibration External - requires purchase of OPTIONAL 100g calibration mass
Communication RS-232, Aftermarket DB9 RS-232 Adapter Converter with USB Cable can be purchased
Platform size (inches) 4.5 diameter
Power Requirements 120V AC Adapter included
Manufacturer Warranty (years) 2
Additional info You can toggle between 5 different weigh modes
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
  Loading...