Sartorius ENTRIS 822i-1S with Internal Calibration
Sartorius ENTRIS 822i-1S digital scale offers motorized internal calibration at a press of the keypad. 820 grams maximum weighing capacity and increments in 0.01 gram graduations. That is one hundredth of a gram.
Availability: 0 left in stock. Usually ships in 2-4 days
YOU PAY: $1,036.20
MFR won't let us advertise below $1,036.20.
If you are looking to spend less money and willing to give up the motorized internal calibration for external calibration then see the Sartorius ENTRIS822-1S
External calibration weights can be lost or misplaced easily, especially in a busy lab and purchasing a balance with motorized internal calibration it can be a true time saver. So it costs you more money with purchase a milligram balance with motorized internal calibration but you save time. Easy calibration, without worrying about purchasing, locating and storing an external calibration weight. The solution to problems associated with external mass calibration can be resolved by purchasing the Sartorius Entris Balance with motorized internal calibration.
Calibration for electronic laboratory balances are critical to ensure accurate weight measurements are taken. Changes in the location where the lab balance was last calibrated makes a difference on weighing results since gravity effect weight. Gravity is not the same everywhere on earth since every place in the world is positioned differently to "magnetic north."
Differences in barometric pressure also creates slight gravitational differences, depending on your particular location's altitude compared to sea level. If the balance is moved to a place where the gravitational pull is greater or less, it will display a different value, as the force will vary.
Calibration is important since you don't want to spend hours running a test, only to find out later that your balance was out of calibration and you'll need to scrap all the weighing data.
The Entris822i-1S calibrates itself with one mass located inside the balance, at the push of a button. Simply press of the "Cal" button and the motorized internal calibration feature performs the calibration to adjust for your location and the affects of barometric pressure and magnetic north. Small changes can mean big differences in your weight measurement results.
The internal calibration is all done automatically performing a span calibration. The process takes less than a minute beginning with no weight on the pan to obtain the zero point, then the motor engages the internal weight to achieve a span point. These values are all stored and calibration is completed.
Sartorius Entris delivers the reliability and quality of a Sartorius balance, but just pay for the features you really need. The Sartorius Entris has been specially designed to achieve effective and reliable weighing results in your daily work. The easy and clearly structured user interface, with its logical key assignment and last but not least the excellent readability, are ideal conditions for safe operation.
If your ISO requires you to perform calibration with an external traceable weight you can still do this with the Entris822i-1S. We always recommend you purchase an optional external 500 gram calibration weight so you can perform the external calibration.
We all heard the word "deflation" but few have really experienced it. Well, the Sartorius ED822-CW had a list price of $1745 when it was sold in 2013 and now the Entris822i-1S in 2017 has a manufacturer suggested retail price of $1570. When you purchase from Precision Weighing Balances we offer a tremendous discount price far less than the Sartorius manufacturer suggested retail price.
The Sartorius Entris822i-1S has several weighing applications (Weighing, Density, Percentage, Counting, Unstable Conditions, & Conversion). Unstable Conditions also known as dynamic animal weighing application allows this digital scale to weigh small insects that may be moving on the weighing pan accurately. Parts counting is another great application allowing this accurate scale to easily count those extremely small and lightweight parts the typical counting scales can't even sense the weight.
Sartorius Entris precision balances all feature a built-in RS-232 interface enabling you to transfer the weighing results to a computer or connect to the Sartorius YDP20-OCE printer.
The easy to read back-lit display and simple controls which make it easy to use this lab balance. When you need to get a heavy workload of repetitive applications done fast and reliably, day and day out, the last thing you need is a lab scale so complicated that it causes operating errors and wastes your valuable time as a result. Welcome to your new Entris balance comfort zone: a simple, easy-to-understand control panel, key function assignments and the easy-to-read display are ideal for efficient weighing in your lab. User-friendly operation: short, plain-English text prompts and cursor keys for navigation make it simple for you to configure the balance to meet your individual requirements. Outstanding readouts thanks to the backlit and high-contrast display (height of digits: 15 mm). The level indicator is positioned conveniently right next to the display so that checking whether the balance is level becomes "second nature" to the operator.
Sartorius products are manufactured with ISO9001 standards and have the CE mark. Sartorius has been proving their trustworthiness thanks to their top-of-the-line technology that ensures maximum accuracy. Sartorius begin building balances in 1871 and holds the Guinness Book of World Record for the most accurate balance in the world. When you have an excellent reputation and image in the technologically sophisticated field of weighing metrology there is no question Sartorius should be your only choice.
The Sartorius Entris Series consists 3 Analytical models (4 decimal places), 4 Milligram Balances (3 decimal places), 5 Precision Balances (2 decimal places) & 3 Precision Scales (1 decimal place) and you can see the Complete Entris Series here.
Sartorius Entris822i-1S is the reincarnation of the Sartorius Extend ED822-CW. The Sartorius Extend ED line was phased-out and replaced with the Sartorius Practum1102-1S, Quintix 1102-1S or Secura 1102-1S. The Secura, Quintix and Practum balances introduced in 2013 featured an entirely new cutting edge design offering with a touch screen display with graphical user interface. These new touch screen balances are very nice and offer advanced weighing applications, but they are also expensive and for some people they prefer tactile keypad buttons over a touchscreen.
While Sartorius focused on high end balances Ohaus and A&D Weighing brought to market the following extremely affordable and precision scales including the Ohaus Pioneer Plus PA1602C, AND FZ1200i and AND WEIGHING FZ1200iWP. It now seems like Sartorius noticed a void in the entry level lab precision scale sector and in December 2016 Sartorius brought to the marketplace the Entris Series. The Sartorius Entris822i-1S is the same platform, housing, weigh sensor and embedded software as the Sartorius Extend. The Sartorius Entris features a new display overlay, new microprocessor and now is RoHS (Restriction of Hazardous Substances) compliant. The overall operation of the Extend and Entris are the same.
We understand purchasing an precision balance is a major capital expense and if you have any questions give us a call and one of our weighing experts can discuss your weighing application and get you the most affordable balance for your weighing needs.
For a limited time we are offering Free shipping via UPS Ground in the lower 48 states for the Sartorius Entris822i-1S.
In the video above we walk you through the menu configuration settings & how to enable or disable weighing applications. The factory default is "weigh" and the weight unit is set to grams only. Easily change this to "Unit" allowing you to toggle an additional 4 weighing units, "Count" for parts counting plus the ability to configure a desired reference sample quantity from 1 to 10, "Percent" for percent weighing proportional to a reference weight commonly used in formulation especially ink mixing, "Animal Weighing" for weighing live insects or small critters, or "Density" for density determination and specific gravity.
See how to configure the Sartorius Entris precision balance changing the factory default setting for the primary weigh unit of grams to pounds. We'll walk you through the steps so you can configure your Entris balance to toggle up to 4 additional different weight units
In the video above we offer a general overview of the Sartorius Entris precision lab balance. We highlight the features, functions and operation of the Sartorius Entris precision balance. See some of the available accessories for the Sartorius Entris like the optional data printer, RS232 cable, calibration weights and weighing below hook.
In the video below we show you the excellent eccentric loading characteristics of the Sartorius Entris Balances. See as a calibration weight is placed in the center of 4 quadrants on the platform how the Sartorius Entris measures the weight accurately. Not all digital balances weigh accurately and if you own a laboratory balance other than Sartorius we doubt it compares to the Sartorius Entris. If you own an older Sartorius balance or someone tries to give you a deal on a used or discontinued Sartorius balance just forget it and buy the Entris.
To test eccentric loading we place a weight on the center of the weighing platform and record the weight. Now place the same item in 45-degree directions (front left, front right, rear right, and rear left) and compared to the measurement at the center. Compare the weighing results and if you have eccentric errors it just might be time to retire that balance and purchase a new Sartorius Entris.
|Capacity x Readability||820 g x 0.01 g|
|Repeatability (std deviation)||±0.01 g|
|Linearity||± 0.03 g|
|Response Time (average)||1 seconds|
|Tare Range||FULL to Capacity|
|Selectable Weight Units||g, kg, ct, lb, oz, ozt, tlh, tls, tlt, Gn, dwt, mg, /lb, tlc, mom, K, tol, bat, and MS.|
|Selectable Application Programs||Toggle between 5 weight units, weigh average, calculation, dynamic animal weighing/averaging, net-total formulation, percent weighing, totalizing, density determination and counting|
|Display Update||0.1 - 0.4 seconds|
|Display||LCD with backlit|
|Operating Temperature Range||50° F to 86° F (+10° C to +30° C)|
|Allowable Ambient Operating Temperature||41° F to 104° F (+5° C to +40° C)|
|Sensitivity Drift||±5 ppm / °C|
|Motorized Internal Calibration||YES|
|External Calibration||Requires Optional 500 gram calibration weight|
|Pan Size||ø5.9" in / ø150 mm|
| Dimensions (entire balance)
W x D x H
| 9" x 11.9" x 3.43"
230 x 303 x 87 mm
|Built-in RS-232 Interface||YES|
|Weighing Below||A port for a hanger for weighing below the balance is available (requires purchase of optional accessory - 3 mm weigh below hook). You can attach a sample using a suspension wire, for example. Common applications for weighing below the balance includes density determination.|
|Power Source||120 VAC AC adapter|
|Power Consumption||maximum 16; typical 8|
|Approx. hours of operation with YRB05Z rechargeable battery pack (backlighting on)||35 hours (requires purchase of optional YRB05Z rechargeable battery pack)|
|Standard Equipment||AC Adapter, Manual|
|Optional Accessories||500 gram weight, RS-232 cable, USB interface kit, external calibration weights, weigh below hook, printer, external rechargeable battery pack, 13" x 15" Granite isolator slab|
YOU PAY: $385.00
YOU PAY: $897.60
YOU PAY: $1,410.25
YOU PAY: $199.99
YOU PAY: $623.70
YOU PAY: $1,029.71
YOU PAY: $1,491.60
YOU PAY: $659.99
YOU PAY: $1,895.50
YOU PAY: $1,090.75
YOU PAY: $1,174.80
YOU PAY: $2,231.25
YOU PAY: $949.99
YOU PAY: $1,013.10
YOU PAY: $761.25
YOU PAY: $845.75
YOU PAY: $739.20
YOU PAY: $1,378.50
YOU PAY: $679.99
YOU PAY: $944.00
YOU PAY: $991.86
YOU PAY: $1,313.40
YOU PAY: $1,627.75
YOU PAY: $1,059.00
YOU PAY: $1,168.20
YOU PAY: $791.25
|Capacity x Readability||820 g x 0.01 g|
|Weight Modes||Carats, Grains, Milligrams, Pounds, Ounces, Pennyweight, Grams, Troy Ounces, KiloGrams|
|Functions||Averaging, Formulation, Percent Weighing|
|Features||Parts Counting, RS-232c, Internal Calibration|
|Legal for Trade||No Legal for Trade|
|Construction||ABS Plastic Housing, Stainless Steel Weighing Pan, LCD Display, Strain Gauge Weigh Sensor|
|Calibration||One button motorized internal calibration|
|Communication||RS-232, Aftermarket DB9 RS-232 Adapter Converter with USB Cable can be purchased|
|Platform size (inches)||5.9 diameter|
|Power Requirements||120V AC Adapter included|
|Manufacturer Warranty (years)||2|
|Additional info||You can toggle between 5 different weigh modes|